User manual

TekSmartLabTBX3000A, TSL3000B User Manual
Appearance
Figure 1: Side view 1 of TBX3000A
One side of TBX3000A has the following connectors, buttons, and indicators:
Ethernet LAN port: The TBX3000A is connected to the network through this port.
USB device port: The original code of the product is burned through this port, which
is used by manufacturer only.
Reset button: If you press this button and hold down to 5 seconds, the SYS indicator
will blink rapidly for 5 seconds, then the default setting (including password and IP
parameters) will be restored.
DC power socket: Use this connector for the DC power supply that came with your
instrument.
Figure 2: Side view 2 of TBX3000A
The figure above shows another side of TBX3000A with six USB 2.0 ports. You can
connect TBX3000A to other instruments by USB cable.
2 TekSmartLab User Manual