xx ZZZ TekSmartLab™ TBX3000A and TSL3000B User Manual *P077111000* 077-1110-00
xx ZZZ TekSmartLab™ TBX3000A and TSL3000B User Manual Register now! Click the following link to protect your product. ► www.tektronix.com/register www.tektronix.
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
This is the hardware warranty. Warranty Tektronix warrants that the product will be free from defects in materials and workmanship for a period of three (3) years from the date of original purchase from an authorized Tektronix distributor. If the product proves defective during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product.
This is the software warranty. Warranty Tektronix warrants that the media on which this software product is furnished and the encoding of the programs on the media will be free from defects in materials and workmanship for a period of three (3) months from the date of shipment. If any such medium or encoding proves defective during the warranty period, Tektronix will provide a replacement in exchange for the defective medium.
TekSmartLab™ TBX3000A, TSL3000B User Manual Table of Contents Important safety information ........................................................................................................................................................ iii General safety summary ......................................................................................................................................................... iii Service safety summary ...........................................................
TekSmartLab™ TBX3000A, TSL3000B User Manual Configuring the Database.................................................................................................................................................. 24 IIS Installation and Configuration ........................................................................................................................................... 32 Installing IIS in Win7 ............................................................................................
TekSmartLab™ TBX3000A, TSL3000B User Manual Important safety information This manual contains information and warnings that must be followed by the user for safe operation and to keep the product in a safe condition. To safely perform service on this product, additional information is provided at the end of this section. (See Service safety summary.) General safety summary Use the product only as specified.
TekSmartLab™ TBX3000A, TSL3000B User Manual the power cord; it must remain accessible to the user at all times to allow for quick disconnection if needed. Use proper AC adapter. Use only the AC adapter specified for this product. Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings and markings on the product. Consult the product manual for further ratings information before making connections to the product.
TekSmartLab™ TBX3000A, TSL3000B User Manual Service safety summary The Service safety summary section contains additional information required to safely perform service on the product. Only qualified personnel should perform service procedures. Read this Service safety summary and the General safety summary before performing any service procedures. To avoid electric shock. Do not touch exposed connections. Do not service alone.
TekSmartLab™ TBX3000A, TSL3000B User Manual The following symbol(s) may appear on the product: Caution Refer to Manual Compliance information This section lists the EMC (electromagnetic compliance), safety, and environmental standards with which the instrument complies. EMC compliance EC Declaration of Conformity – EMC Meets intent of Directive 2004/108/EC for Electromagnetic Compatibility.
TekSmartLab™ TBX3000A, TSL3000B User Manual EN 61000-3-3:1995. Voltage changes, fluctuations, and flicker European contact. Tektronix UK, Ltd. Western Peninsula Western Road Bracknell, RG12 1RF United Kingdom Australia / New Zealand Declaration of Conformity – EMC Complies with the EMC provision of the Radiocommunications Act per the following standard, in accordance with ACMA: CISPR 11:2003. Radiated and Conducted Emissions, Group 1, Class A, in accordance with EN 61326-1:2006.
TekSmartLab™ TBX3000A, TSL3000B User Manual Pollution degree 3. Conductive pollution, or dry, nonconductive pollution that becomes conductive due to condensation. These are sheltered locations where neither temperature nor humidity is controlled. The area is protected from direct sunshine, rain, or direct wind. Pollution degree 4. Pollution that generates persistent conductivity through conductive dust, rain, or snow. Typical outdoor locations.
TekSmartLab™ TBX3000A, TSL3000B User Manual TBX3000A Overview This guide introduces the TBX3000A and provides a step by step demonstration of how to use the product.
TekSmartLab™ TBX3000A, TSL3000B User Manual Appearance Figure 1: Side view 1 of TBX3000A One side of TBX3000A has the following connectors, buttons, and indicators: Ethernet LAN port: The TBX3000A is connected to the network through this port. Reset button: If you press this button and hold down to 5 seconds, the SYS indicator will blink rapidly for 5 seconds, then the default setting (including password and IP parameters) will be restored.
TekSmartLab™ TBX3000A, TSL3000B User Manual The figure below is the top view of TBX3000A, showing the Tektronix logo and indicators. Figure 3: Top view of TBX3000A The first six are USB indicators. If the indicator is on or blinking, it means some instrument is connected to TBX3000A through a USB port. The one next to the USB indicators is the WIFI indicator: TekSmartLab User Manual o If it’s not on, it means the USB WIFI dongle is not installed.
TekSmartLab™ TBX3000A, TSL3000B User Manual The figure below shows the bottom of the TBX3000A. Figure 4: Bottom view of TBX3000A The part illustrated as 7 is a socket for USB WIFI dongle like Netgear WNA1000M.
TekSmartLab™ TBX3000A, TSL3000B User Manual Configure the TBX3000A When the TBX3000A is connected to the network, you can configure instrument parameters. The default IP address for the instrument is 192.168.1.101. Enter the default address into a web browser, press Enter, and the welcome page shown in Figure 5 is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual LAN Configuration Click LAN Configuration in the navigation bar on the left to show the LAN Configuration page. Figure 6: LAN configuration Click Modify to configure the LAN parameters. The default LAN configuration values are shown below: Host Name TCP/IP Configuration Mode IP Address Subnet Mask Default Gateway 6 Bench1 Manual 192.168.1.101 255.255.255.0 192.168.1.
TekSmartLab™ TBX3000A, TSL3000B User Manual WIFI Configuration Click WIFI Configuration in the navigation bar on the left to show the WIFI Configuration page. Figure 7: WIFI configuration Click Modify to configure WIFI network parameters. Click Scan AP to search for the SSID of the WIFI network. NOTE: The TBX3000A will connect to the WIFI network, only after the USB WIFI dongle is installed on the instrument and the LAN cable has been disconnected.
TekSmartLab™ TBX3000A, TSL3000B User Manual Set Password Click Set Password in the navigation bar on the left to change the password for the instrument. Figure 8: Set password You can change the password on this page. The default password is admin.
TekSmartLab™ TBX3000A, TSL3000B User Manual Example Case The scenario of the sample case is: Two TBX3000As are going to be connected to a WIFI network. The two TBX3000A instruments are located at bench 1 and bench 2. The name of the WIFI network is ‘school_lab_1’. Preparation Install the USB-WIFI dongle from the down facet of TBX3000A and turn the power on.
TekSmartLab™ TBX3000A, TSL3000B User Manual Figure 10: LAN configuration The parameters are as follows: IP address： Subnet mask: Default gateway: 192.168.1.66 255.255.255.0 192.168.1.1 Enter the IP address 192.168.1.101 in your browser, and then configure the TBX3000A.
TekSmartLab™ TBX3000A, TSL3000B User Manual Make sure the computer is connected to the ‘school_lab_1’ network. If the computer is successfully connected via WIFI, you will see the figure below. Figure 12: Computer is connected to ‘school_lab_1’ network Enter the IP address of 192.168.1.101 into your browser, and then configure the TBX3000A. NOTE: The ‘school_lab_1’ network is generated by the router.
TekSmartLab™ TBX3000A, TSL3000B User Manual In the WIFI Configuration page, click Scan AP to search for the WIFI network. Figure 14: Scan AP Choose school_lab_1, and then click Apply. If the ‘school_lab_1’ network can only be accessed by a password, a prompt will pop up as shown in the figure below. Enter the password and click Connect.
TekSmartLab™ TBX3000A, TSL3000B User Manual Change TBX3000A Hostname Click Modify next to Host Name, and then enter “admin” as the password if required. Change the name into Bench1, as shown in the following figure. Note that the TCP/IP configuration Mode is on Automatic as default. Figure 16: Change host name Click Submit. The configuration is done as shown in the figure below.
TekSmartLab™ TBX3000A, TSL3000B User Manual Repeat the procedure to configure the TBX3000A in the second bench and change its host name as Bench2. After the configuring both TBX3000A instruments, the two are connected to ‘school_lab_1’ network automatically, and will be automatically recognized as bench1 and bench2 by the TSL3000B software, which is running on lab server. NOTE: The WIFI connection on the TBX3000A will start to work only after the cable has been removed from the LAN port.
TekSmartLab™ TBX3000A, TSL3000B User Manual TSL3000B Installation Hardware and Software Requirements for the Server Hardware Requirements CPU: 2.3 GHz dual-core or higher Memory: 4 GB DDR3 or higher Display: Resolution of 1366 by 768 or higher Storage: 160 GB or higher Software Requirements Operating system: Win7 Professional, Enterprise, or Ultimate Web explorer: IIS 6.
TekSmartLab™ TBX3000A, TSL3000B User Manual Installing SQL Server 2008 R2 Express Downloading the Installation Pack Visit http://www.microsoft.com/en-us/download/details.aspx?id=30438, and choose the language consistent with your operating system and also choose the installation pack consistent with the bit number of your operation system. For example; For 64-bit Win7 (English), choose SQLEXPRWT_x64_ENU.exe For 32-bit Win7 (English), choose SQLEXPRWT_x86_ENU.
TekSmartLab™ TBX3000A, TSL3000B User Manual You may have to wait up to two minutes while the installer extracts the TSL3000B installation files. Then the following figure is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual 2. Click New installation or add features to an existing installation. The following figure is displayed. Figure 20: License terms 3. 18 Select I accept the license terms.
TekSmartLab™ TBX3000A, TSL3000B User Manual 4. Click Next. The following figure is displayed. The program will check whether the files for installation are correct.
TekSmartLab™ TBX3000A, TSL3000B User Manual After verifying the files, the following figure is displayed. Figure 22: Feature selection 5. Click Select All. 6. Click Next. The following figure is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual 7. Select Default Instance. 8. Click Next. The following figure is displayed. Figure 24: Server configuration 9. Click Next. The following figure is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual 10. For authentication mode, select Mixed Mode. 11. Input the system administrator (sa) password “TekSmartLab2015”. NOTE: This password is mandatory. Make sure that T, S, and L are in uppercase. 12. Click Next. The following figure is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual 13. Click Next. The following figure is displayed. Figure 27: Installation progress While this figure is being displayed, the database system is being installed. This typically takes about 10 to 20 minutes to complete. When complete, the following figure is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual 14. Click Close. The installation of the database system is complete. Configuring the Database 1. Select SQL Server Configuration Manager in the Start menu of Windows, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 2. In the SQL Server Configuration Manager, click SQL Server Network Configuration >> Protocols for MSSQLSERVER, and then right-click TCP/IP in the right panel as shown in the following figure. Depending on the operating system, the SQL Server Network Configuration link might be (32 bit) or (64 bit). Figure 30: Enable TCP/IP protocol 3. Select Enable in the pop-up menu. The following figure is displayed after you enable TCP/IP.
TekSmartLab™ TBX3000A, TSL3000B User Manual 4. Click SQL Server Services in the left panel. The following figure is displayed. Figure 32: SQL server services 5. Click SQL Server (MSSQLSERVER) in the right panel. 6. Click 7. Close the window. 8. Click Start >> All Programs >> Microsoft SQL Server 2008 R2 >> SQL Server Management Studio, as shown in the following figure. in the tool bar to restart the SQL server service. Figure 33: Select SQL Server Management Studio 9.
TekSmartLab™ TBX3000A, TSL3000B User Manual 13. Enter TekSmartLab2015 for Password, as shown in the following figure. Figure 34: Connect to server 14. Click Connect to log in. The following figure is displayed. Figure 35: Main screen 15. In the left panel, right-click Database.
TekSmartLab™ TBX3000A, TSL3000B User Manual 16. Select Restore Database, as shown in the following figure. Figure 36: Restore database 17. Enter TSLDatabase next to To database. 18. Select From device. 19. Select ‘…’. 20. Click Add, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 21. Find the file TSLDatabase.bak under the directory: - For 64-bit Win7: C:\Program Files (x86)\Tektronix\TekSmartLab\ TSLDatabse.bak - For 32-bit Win7: C:\Program Files\Tektronix\TekSmartLab\ TSLDatabse.bak NOTE: If you are not able to find the file, select All Files next to Files of type, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 22. Click OK after you find the file, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 23. Select the file using the checkbox in the Restore column, and then click OK, as shown in the following figure. Figure 40: Select the most recent database 24. Click OK to complete the configuration, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual IIS Installation and Configuration Installing IIS in Win7 1. Click Start >> Control Panel >> Programs >> Turn Windows features on or off, and then select Internet Information Services as shown in the following figure. Figure 42: Select Internet information services NOTE: If you are installing IIS for the first time, make sure that you follow the instructions above. 2.
TekSmartLab™ TBX3000A, TSL3000B User Manual 3. Click OK. NOTE: Make sure that Web Management Tools is selected by default. After a few minutes, the installation will finish. Installing IIS for Web Server 1. Open the Internet Information Services (IIS) Manager on your computer one of the following two ways: - Click Start, and enter IIS in the search box. Then open the Internet Information Services (IIS) Manager from the search results.
TekSmartLab™ TBX3000A, TSL3000B User Manual 4. Click Stop under Manage Web Site in the right panel, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 5. Right-click Sites and select Add Web Site…, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 6. Enter SLWeb under Site name. 7. Under Physical Path, select one of the two directories for the SLWeb file. 8. - For 64-bit: C:\Program Files (x86)\Tektronix\TekSmartLab\SLWeb - For 32-bit: C:\Program Files\Tektronix\TekSmartLab\SLWeb Click OK, as shown in the following figure, to finish.
TekSmartLab™ TBX3000A, TSL3000B User Manual Configuring ASP.NET 4.0 1. Open Internet Information Services (IIS) Manager as described before. 2. Select the server name in the left panel (highlighted in the following figure). 3. Double-click ISAPI and GGI Restrictions in the middle panel.
TekSmartLab™ TBX3000A, TSL3000B User Manual 4. Right-click the two ASP.NET 4.0 entries to change the restriction to be Allowed, as shown in the following figure. Figure 48: Allow ASP.NET 4.0 After you’ve changed the status of the two entries, the following figure is displayed. Figure 49: ASP.NET 4.
TekSmartLab™ TBX3000A, TSL3000B User Manual NOTE: Under some conditions, you may not be able to find ASP.NET v4.0, as shown in the following figure. Figure 50: ASP.NET v4.0 not found In this case, you can solve the problem by using a DOS command (as administrator). a. Under Start >> All Programs >>Accessories, right-click Command Prompt. b. Select Run as administrator. c. Enter one of the following commands in the window: For 64-bit Win7: C:\Windows\Microsoft.NET\Framework64\v4.0.
TekSmartLab™ TBX3000A, TSL3000B User Manual You can also copy and paste the command in the window, as shown in the following figure. Figure 51: Paste command by right key After you enter the command, the following figure is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual Press Enter to run the command, the following figure is displayed. Figure 53: Result of the command running As shown in the figure, ASP.NET v4.0 is installed. You should now be able to configure ASP.NET v4.0 according to the procedures described in this section.
TekSmartLab™ TBX3000A, TSL3000B User Manual Configuring ASP.Net State Server 1. On the desktop, right-click Computer. 2. Select Manage. The Computer Management screen is displayed, as shown in the following figure. 3. Select Computer Management (Local) >> Services and Applications >> Services. 4. Select ASP.Net State Service in the right panel to confirm that the status is ‘Started’ and Startup Type is ‘Automatic’.
TekSmartLab™ TBX3000A, TSL3000B User Manual If not, change them by following the steps: 1. Right-click ASP.Net State Service. 2. Select Start or Restart. 3. Double-click ASP.Net State Service. 4. Change the Startup Type to Automatic, as shown in the following figure. Figure 55: Configure ASP.Net State Service TekSmartLab User Manual 5. Click OK to complete the setting. 6. Close the Computer Management screen.
TekSmartLab™ TBX3000A, TSL3000B User Manual Windows Firewall Configuration You can open the firewall setting screen by navigating to Start >> Control Panel >> System and Security >> Windows Firewall >> Advanced Setting’. Adding Inbound Rules 1. Double click Inbound Rules and then right-click it to display the pop-up menu. 2. Select New Rule…, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 3. Select Port, and then click Next, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 4. Select TCP. 5. Select Specific Local ports. 6. Enter 80 next to Specific Local ports. 7. Click Next.
TekSmartLab™ TBX3000A, TSL3000B User Manual 8. Select Allow the connection, and then click Next.
TekSmartLab™ TBX3000A, TSL3000B User Manual 9. Select all three checkboxes and click Next, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 10. Enter Web under Name. 11. Click Finish, as shown in the following figure. Figure 61: Name After you click Finish, the following figure is displayed.
TekSmartLab™ TBX3000A, TSL3000B User Manual Adding Outbound Rules Double-click Outbound Rules and right-click it again. Repeat the steps for adding inbound rules to add outbound rules. The following figure indicates that you have successfully added outbound rules. Figure 63: Outbound rules added Close all the windows once you are finished.
TekSmartLab™ TBX3000A, TSL3000B User Manual Testing the Web Server 1. Open Internet Information Service (IIS) Manager as described before. 2. Select Application Pools in the left panel, as shown in the following figure. 3. Confirm that the parameters of SLWeb in the right panel are correct: Figure 64: Application pools - The version of .NET Framework should be 4.0 (or a version consistent with what is installed). - Managed pipeline mode should be Classic.
TekSmartLab™ TBX3000A, TSL3000B User Manual 4. Click SLWeb in the left panel under Sites. 5. Click Browse*:80 (http) in the right panel, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual Windows will automatically open Internet Explorer to visit http://localhost/. You can also enter http://localhost/ or http://127.0.0.1/ manually in the address box of your Web browser to visit the web page. The following figure is the web page displayed. Figure 66: TekSmartLab web page This web page indicates that the TekSmartLab web server works fine. (You can ignore the caution message in the figure above.
TekSmartLab™ TBX3000A, TSL3000B User Manual TSL3000B Home Screens The TSL3000B has two home screens. The default screen (see below) shows courses that can be chosen, allowing you to configure the parameters of instruments. Figure 67: Default (courses) home screen Click the arrow pointing right. You will see the other home screen (see below), which shows instruments that can be configured.
TekSmartLab™ TBX3000A, TSL3000B User Manual Software Activation 1. Enter the setting screen from the instruments home screen by clicking the gear icon in the upper-right of the screen. The following figure is displayed. Figure 69: Setting screen 2. Enter the activation code you received from Tektronix next to Activation Code. 3. Click Active to activate the software. NOTE: The Software SN is generated automatically when the software is installed on the computer.
TekSmartLab™ TBX3000A, TSL3000B User Manual Choosing and Editing Courses Figure 70: Home screen based on courses 56 1. On the Course home screen, you can choose different courses. The left arrow and right arrow that appear when you hover the cursor over the courses allow you to move between courses. 2. Click the magnifying glass icon to search the courses. 3. Click + to add a new course. 4. Click - to delete the selected course.
TekSmartLab™ TBX3000A, TSL3000B User Manual Configuring Courses Double click a course to enter the course configuration screen as shown below: Figure 71: Course configuration screen 5. Click image to change the image of this course. Enter information about this course in the Course Name and Overview boxes. 6. Set the sequence order of this course by entering a number in the Sequence No. box. 7. Select the box beside the name of the instruments to use for this course. 8.
TekSmartLab™ TBX3000A, TSL3000B User Manual 10. Select the benches to be configured before you click Apply. You can select or deselect one bench, multiple benches, or all benches. The shadow underneath the number icon means that the bench is selected. Figure 72: Benches selection Click Apply to distribute the configurations to the chosen benches. You can also click Capture to capture the current configuration of a selected bench (only one bench can be chosen).
TekSmartLab™ TBX3000A, TSL3000B User Manual Configuring Instruments You can configure instruments in a batch on the Instruments home screen based on instruments. Home Screen based on Instruments Figure 73: Home screen based on instruments You can double-click the icon of an instrument to select it, and then configure the parameters in a batch.
TekSmartLab™ TBX3000A, TSL3000B User Manual Configuring instruments The process of instrument configuration is demonstrated by the following oscilloscope configuration screen. Figure 74: Oscilloscope configuration screen 1. On the oscilloscope configuration screen, a waveform is displayed only after the instrument configuration of a bench is captured (see Figure 75). 2. Choose a bench that has the instrument you wish to configure by selecting the appropriate icon.
TekSmartLab™ TBX3000A, TSL3000B User Manual Configuring Benches Bench Monitoring Screen Enter the bench-monitoring screen from the Instruments home screen by clicking the Benches area on the home screen. Figure 76: Home screen based on courses Figure 77: Bench monitoring screen In the figure above, the benches are displayed as numbered icons.
TekSmartLab™ TBX3000A, TSL3000B User Manual 1. Click a bench icon, and you will be able to configure the instruments on that bench. (Refer to Monitoring and Controlling Instruments on a Bench). 2. Click 3. Each bench has four instruments as shown in Figure 77. Status is displayed using three colors: to enter the bench configuring screen. a. Green indicates that the instrument is connected and functioning. b. Grey indicates that the instrument is not connected.
TekSmartLab™ TBX3000A, TSL3000B User Manual Figure 79: Editing benches 4. Double-click the icon of a bench to delete a bench; if you double-click the blank again, the bench will reappear on the screen. 5. Click Apply to save the bench configuration. NOTE: For the trial version, the bench number is limited to 5.
TekSmartLab™ TBX3000A, TSL3000B User Manual Monitoring and Controlling Instruments on a Bench Click one of the benches, and you will enter the instrument monitoring/controlling screen as shown below. Figure 81: Instrument monitoring/controlling screen The parameters and waveform of the instruments on the bench are displayed automatically on this screen, and you can change the parameters manually. 1. Click 2. The parameters of the instruments that you can configure are displayed on this screen.
TekSmartLab™ TBX3000A, TSL3000B User Manual Figure 82: Oscilloscope configuration screen 4. You can set the parameters of the oscilloscope in this area. 5. You can enable, disable, and execute Autoset in this area. 6. Click Snapshot to capture the waveform of the oscilloscope.
TekSmartLab™ TBX3000A, TSL3000B User Manual Test Results Students can use their mobile phone or computer to retrieve and save test results and oscilloscope image wirelessly. Refer to Saving test results by Students for more details. All the test results saved by students after their login will be saved on the lab server automatically. Follow the steps below to check the results of the test performed by students: 1. Click the Test Results button on the Course Home page, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual 2. Enter the name of the student next to Student Name. 3. Enter the ID of the student next to Student ID. 4. Enter the start time of the period you want to query next to Start. 5. Enter the end time of the period you want to query next to Stop. 6. Click to see the list of results. To check the details of the test result: 7. Select an entry in the results. 8.
TekSmartLab™ TBX3000A, TSL3000B User Manual Instrument Asset Information On the Instrument Home screen shown in the following figure, click the Asset Info. button to check the instrument asset information. Figure 87: Home screen based on instruments The following figure is displayed. Figure 88: Instrument asset information report In the figure: 68 1. Enter the start time and end time of the period you want to query. 2.
TekSmartLab™ TBX3000A, TSL3000B User Manual 3. Click the button 4. Asset information of the manufacturer, model, serial number, utility time etc. for the instruments is listed here. 5. Click the Print button to print the asset information, as shown in the following figure. to start the search. Figure 89: Print preview Settings Click the setting icon in the upper-right corner of the Instrument home screen, and you will enter the software setting screen, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual Setting Screen The following figure is the setting screen. Figure 91: Setting screen In the screen: 70 1. Select the language. You may select English or Chinese. 2. Enter the lab name in this box. After you enter the name, it will appear on the main screen. 3. Select the school logo. The selected logo will appear on the web page where students save the test result. 4. Click QR Code, to enter the screen where the QR code is created. 5.
TekSmartLab™ TBX3000A, TSL3000B User Manual QR Code Screen Since the TSL3000B creates a web page for every bench, professors can turn the web page address assigned to each bench into a QR code, and paste the printed code on the bench. Thus students can easily access the web page by scanning the QR code. The following image shows the screen for creating the QR code. You can access this page by clicking the QR Code button on the Settings screen.
TekSmartLab™ TBX3000A, TSL3000B User Manual Figure 93: QR code print preview screen Courseware Upgrade Screen In the Settings screen click the Courseware link to see the courseware upgrade screen, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual Instrument Firmware Upgrade Screen Click Instrument in the Settings screen to see the instrument firmware upgrade screen, as shown in the following figure. Instrument firmware can be updated remotely using this screen. Only the TBS1000B-EDU instruments support this function. Figure 95: Instrument firmware upgrade screen TBX3000A Upgrade Screen Click TBX3000A on the Settings screen to see the TBX3000A upgrade screen, as shown in the following figure.
TekSmartLab™ TBX3000A, TSL3000B User Manual As an example, to upgrade the firmware version of the TBX3000A instruments in the benches from version 01.01.01 to version 01.01.02: 1. Select Firmware. 2. Select the upgrade file for version 01.01.02. 3. Select the benches need to be upgraded in the lower part of the screen. Click Apply. It takes about 3 minutes to upgrade each TBX3000A.
TekSmartLab™ TBX3000A, TSL3000B User Manual Example Cases A few examples of using the TSL3000B are shown in this section. Setup a TekSmartLab system Follows the steps below to setup the TekSmartLab system via WIFI: 1. 2. Configure the WIFI router. To create the TekSmartLab local WIFI network, refer to WIFI router user manual using the following parameters to configure the WIFI network: - Wireless Network Mode: 2.4GHz, 802.
TekSmartLab™ TBX3000A, TSL3000B User Manual d. Set the host name of the TBX3000A to correspond to the bench on which it is located. e. You should change the default password of the TBX3000A to avoid the settings being changed by other users. 3. Install and configure the lab server software. Please refer to Installing TSL3000B for more details, including installing and configuring the TSL3000B application software, .net framework, Web Service (IIS6.0 or higher) and SQL Server 2008 R2 on the lab server.
TekSmartLab™ TBX3000A, TSL3000B User Manual Arranging the Benches Figure 97: Layout of a lab The preceding figure showcases the layout of a lab. There are 16 benches in total with a hallway in the middle.
TekSmartLab™ TBX3000A, TSL3000B User Manual You can represent this layout in TSL3000B using the instructions below: 1. Enter the bench configuration screen (refer to Bench Configuration Screen), as shown in the following figure. Figure 98: Bench configuration screen 2. Set Row to 4 and Column to 5 (four columns of benches and one hallway). 3. Click Apply. The layout of 20 benches is displayed in the following figure. Figure 99: Arranging benches 4.
TekSmartLab™ TBX3000A, TSL3000B User Manual Figure 100: Arranging benches 5. Click Apply. An alert that reads Original setting will be cleaned, continue? will be displayed. 6. Click Yes to finish the setting. Then the bench monitoring screen will appear as follows.
TekSmartLab™ TBX3000A, TSL3000B User Manual Customizing Courses and Configuring Instruments This example explains how to create a new course, and how to configure the instruments for this course. 1. On the Course home screen, click + to create a new course. Figure 102: Creating a new course 2. Use the Course Name, Sequence Number, and Course Overview boxes to input appropriate information, as shown in the following figure. 3. Press Enter. Figure 103: Customizing a course 4.
TekSmartLab™ TBX3000A, TSL3000B User Manual 5. Select the instrument to be configured and set the parameters. NOTE: Only the instruments properly connected to the server can be configured. In the following figure, the arbitrary function generator (AFG) and oscilloscope (Scope) are configured. The digital multimeter (DMM) and power supply (PWS) are selected, and their Reset boxes are selected. Figure 104: Configuring instruments 6. Choose the bench to be configured, and click Apply.
TekSmartLab™ TBX3000A, TSL3000B User Manual Saving the Test Result Saving test results by Students 1. Connect the cellphone or computer to the TekSmartLab™ network. 2. Scan the QR code a mobile device or enter the web page address of the bench in the Web browser to see the web page of the bench. The following figure is displayed if you logged in with your mobile phone. The Course Name shows the name of the current (active) course.
TekSmartLab™ TBX3000A, TSL3000B User Manual Figure 107: Bench web page 3. Click 1 to get the oscilloscope snapshot, as shown in the following figure. Figure 108: Oscilloscope snapshot TekSmartLab User Manual 4. Enter comments, like “Amplifier Testing” in the Comments: field. 5. Click Save.
TekSmartLab™ TBX3000A, TSL3000B User Manual 6. Click 2, and repeat the steps above to get the second test result. The following page is displayed. Figure 109: Bench web page 7. Click Download after you finish the test. All the test results will be downloaded as a zip file. All the results are also saved in the server for the teacher to query. The following figure is an example of a saved test result.
TekSmartLab™ TBX3000A, TSL3000B User Manual Figure 110: Test result saved TekSmartLab User Manual 85
TekSmartLab™ TBX3000A, TSL3000B User Manual 86 TekSmartLab User Manual
