User Manual

Setting or viewi

ng USB Device port parameters

Setting or vie

wing USB Device port p arameters

Use the USB menu (Utility > Conﬁg > USB) to select the device that the USB Device port is connected to, disable the USB

Device port, and view the U SBTMC protocol registration information.

NOTE. These USB controls do not disable the USB Host ports.

Selecting which device is attached to the USB Device port

Use this procedure to select which device is connected to the USB Device port. A supported device does not need to be

connected to the USB Device port to select that item.

NOTE. The c

urrent software release only supports a PC connection.

1. Push Utility front-panel button.

2. Push the Conﬁg side-menu button. The USB menu item (at top of the Conﬁg side menu) shows the USB Device port

connection status.

3. Use the Multipurpose knob to select and click USB.TheUSB Device Po rt menu lists available devices to which you

can connect. A grayed out menu item cannot be selected.

4. If the USB Device port is Disabled (off Bus), s elect and click the device to which you want to connect.

80 TBS2000 Series User Manual