User Manual

Erasing data fro
m oscilloscope memory (TekSecure)
Erasing data f
rom oscilloscope memory (TekSecure)
The TekSecure™ function erase all setup and waveform information saved in the nonvolatile oscilloscope memory. If
you have acquired confidential waveform data on your oscilloscope, or use the oscilloscope in a restricted area, use the
TekSecure function to erase memory and setup data before y ou return the oscilloscope to general use.
The TekSecure function:
Replaces all waveforms in all reference memories with z ero (0) values
Replaces the current front-panel setup and all stored setups with the default setup
Displays a confirmation or warning message, depending on whether the verification is successful or unsuccessful
1. Push Utility.
2. Push the Config side menu.
3. Use the Multipurpose knob to select and click TekSecure Erase Memory.
4. The screen shows a confirmation message.
5. Select and click OK to start the TekSecure procedure. The erase operation takes up to three minutes.
6. To cancel the procedure, select No or push the Menu Off button.
7. When the TekSecure procedure i s finished, the oscilloscope automatically powers off and then powers back on.
TBS2000 Series User Manual 79