User Manual

Using the USB Fil
e Utility functions
Changing the default file save location on the USB drive
By default, the oscilloscope saves image, waveform, and setup files to the top directory of the USB drive. Use this procedure
to select a different default save folder on the USB drive in which to save files.
1. Push the Save/Recall front-panel button.
2. Push the F ile Utility side-menu button.
3. Use the Multipurpose knob to navigate to and highlight a folder in which to save files.
4. Push the Change Folder side-menu button. Saved files will now be saved to this location.
Default save folder location rules
The new save folder location remains in effect until:
A new location is set with the Change Fo lder button.
The oscilloscope is powered down. The save l ocation changes back to the top level of the U SB drive.
The following actions do not change the file save location. The oscilloscope shows an e rror message when it tries to
save the file to a location that it cannot find. Use the C han ge Folder function to change the working folder location
to an existing folder and try the save operation again.
Deleting the save location folder.
Removing or inserting a USB drive.
Pushing the Default Setup front-panel button.
TBS2000 Series User Manual 75