User Manual

Acquisition set
up
1. Push Utility.
2. Push -More- Page 1/2 side-menu button.
3. Push Autoset Enable side-menu button.
4. Use the Multipurpose knob to select and click Autoset Enable. The oscilloscope opens the Autoset Enable password
entry screen.
5. Use the Multipurpose knob and side-menu buttons to enter the password that lets you disable Autoset. The factory
default password is 000000
6. Push OK side-menu button to enter the password and let you disable Autoset.
How to change the Autoset password
Use this procedure to change the Autoset Enable/Disable password. Autoset requires a password to enable or disable
the Autoset mode.
1. Push Utility.
2. Push -More- Page 1/2 side-menu button.
3. Push Autoset Enable side-menu button.
4. Use the Multipurpose knob to select and click Change Password. The oscilloscope opens the Change Password
entry screen.
5. Use the Multipurpose knob and side-menu buttons to select alphanumeric and enter characters for the current
password. Then push the OK side-menu button. The factory default password is 000000.
6. Use the Multipurpose knob and side-menu buttons to enter the new password. Then push the OK side-menu button.
Reenter the new password to confirm it and push the OK side-menu button.
TBS2000 Series User Manual 41