User Manual

Getting acquain
ted with the oscilloscope
Doing a functional check
Perform this quick functional check to verify that your oscilloscope is operating correctly.
1. Connect the oscilloscope power cable
as described in Powering On the
Oscilloscope. (See page 7.)
2. Power on the oscilloscope.
3. Connect a probe that came with the
oscilloscope to channel 1.
4. Connec
t the probe tip and ground lead
to the PROBE COMP connectors on
the oscilloscope front panel. T he probe
tip con
nectstothe5Vconnector, and
the ground clip connects to the ground
connector.
5. Push Default Setu p. Default Setup
returns the oscilloscope settings to
factory default values. (See page 112,
The default oscilloscope settings (Default
Setup).)
14 TBS2000 Series User Manual