User Manual

The graphical us
er interface elements
Do not use the Horizontal or Vertical Scale or Position knobs to examine a stopped or single-acquired waveform;
instead, use the Zoom controls and Multipu rpo se knob.
2. The trigger status readout shows the
trigger conditions:
Trig'd: Triggered
Auto: Acquiring untriggered data
PrTrig: Acquiring pretrigger data
Trig?: Waiting for trigger
3. The trigger position icon (T) shows where
the trigger occurred in the waveform
record.
The expansion point icon (the orange
triangle at the top of the T) shows the
center point around which the horizontal
scale control expands or shrinks the
waveform (the center expansion point).
4. The waveform record view shows the
trigge
r location relative to the entire
waveform record. The line color
corresponds to the selected waveform
color.
Theareainbracketsisthepartof
the waveform record that is displayed on
the screen.
5. The Wi-Fi icon indicates when a Wi-Fi
transceiver dongle is connected to the
osci
lloscope.
6. The Network icon indicates w hen the
osci
lloscope is connected to a local area
network (LAN).
7. The File Save icon indicates when the
oscilloscope send a file to the USB driv e.
TBS2000 Series User Manual 107