User Manual

The oscilloscop
e controls
Rear-panel connectors
1. Aux Out. Sends a positive pulse
(low-to-high
transition) when a trigger
occurs, to synchronize other test
equipment to trigger events.
NOTE. The Aux
Out sends out a trigger
signal from the last active channel as long
as the signal it was triggering on is still
connected, e
ven if that channel is turned off.
NOTE. The Au
x Out sends out random
pulses when there are no signals connected
to the oscilloscope.
2. LAN. Connects to a 10/100 Base-T local
area netwo
rk for file or printer access.
3. USB 2.0 Ho
st port. A standard USB host port which lets you connect a USB Wi-Fi transceiver adapter (dongle) for
wireless connectivity (A Tektronix TBS2000 series exclusive feature), or to USB flash drives with which to save or recall
waveforms, settings, screen images, and Courseware education packages.
4. USB 2.0 Device port. Use the USB 2.0 Full Speed Device port to connect to a P C for remote control.
NOTE. T
he cable connected from the USB 2.0 Device port to the host computer must meet the USB2.0 specification for high
speed operation when connected to a high speed host controller.
TBS2000 Series User Manual 105