User Manual

Remotely contro

lling the oscilloscope from a Web browser (LXI)

Remotely cont

rolling the oscilloscope from a Web browser

(LXI)

The oscilloscope has a built-in LXI-compliant browser interface. The Web browser shows instrument status, conﬁguration,

and controls with which to remotely control the oscilloscope and view waveforms. You can connect to the oscilloscope Web

page by simply entering the oscilloscope’s IP address in the address bar of a Web browser.

Prerequisites:

The oscilloscope is connected to a network (LAN or Wi-Fi).

The oscilloscope has an assigned IP address.

(See page 82, Setting up the LAN network.) (See page 85, Setting up the Wi-Fi network .)

1. Open a Web browser on the PC.

2. Enter the oscilloscope IP address on the URL line of the browser. For example: HTTP://135.62.88.157.

3. The browser searches for and opens the TBS2000 Welcome Web page for the oscilloscope.

NOTE. If the PC browser does not display the oscilloscope browser page, verify that the o scilloscope is connected and

communicating with the local network to which the PC has access, and that the IP address that you entered in the PC

browser is correct.

4. Use the mouse and cursor to select browser tabs and interact with the available osc illosc ope controls. You can use the

mouse to select and open menus and submenus. Use the keyboard to enter numeric values where required.

90 TBS2000 Series User Manual