Datasheet

Sensitivity, edge–type trigger, DC
coupled
Trigger Source Sensitivity
Analog inputs 0.4 division from DC to 50 MHz
0.6 divisions >50 MHz to 100 MHz
Trigger level ranges Input channels: ± 4.90 divisions from center screen
Data storage
Nonvolatile memory retention
time, typical
No time limit for Front Panel Settings, saved waveforms, setups, and calibration constants.
Real-Time clock A programmable clock providing time in years, months, days, hours, minutes, and seconds.
Waveform measurements
Cursors Time, amplitude and screen.
Automated measurements 32, of which up to six can be displayed on-screen at any one time. Measurements include: Period, Frequency, Rise Time, Fall
Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive
Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive
Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area, Cycle Area, Delay FR, Delay FF, Delay FR,
and Delay RR.
Gating Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, between waveform cursors
or full record length.
Waveform math
Arithmetic Add, subtract, and multiply waveforms.
FFT Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or
Blackman-Harris.
Remote control software
LXI web page LXI Core 2011. Built-in web page enables remote control of horizontal and vertical scale, trigger settings, and measurements.
Allows waveform and image save to USB flash drive.
Display system
Display type 9 inch (228 mm) wide format liquid crystal TFT color display.
Display resolution 800 horizontal by 480 vertical displayed pixels (WVGA).
Waveform styles Vectors, Variable Persistence, and Infinite Persistence.
Graticules Grid, None.
Format YT and XY.
Datasheet
Trigger system
8 www.tektronix.com