User manual
Table Of Contents
- toc
- General safety summary
- Compliance Information
- Preface
- Getting Started
- Operating Basics
- Understanding Oscilloscope Functions
- Application Examples
- Taking Simple Measurements
- Using Autorange to Examine a Series of Test Points
- Taking Cursor Measurements
- Analyzing Signal Detail
- Capturing a Single-Shot Signal
- Measuring Propagation Delay
- Triggering on a Specific Pulse Width
- Triggering on a Video Signal
- Analyzing a Differential Communication Signal
- Viewing Impedance Changes in a Network
- Data Logging
- Limit Testing
- Math FFT
- USB Flash Drive and Device Ports
- USB Flash Drive Port
- File Management Conventions
- Saving and Recalling Files With a USB Flash Drive
- Using the Save Function of the Print Front Panel Button
- USB Device Port
- Installing the PC Communications Software on a PC
- Connecting to a PC
- Connecting to a GPIB System
- Command Entry
- Connecting to a Printer
- Printing a Screen Image
- Reference
- Appendix A: Specifications
- Appendix B: TPP0101 and TPP0201 Series 10X Passive Probes Inform
- Appendix C: Accessories
- Appendix D: Cleaning
- Appendix E: Default Setup
- Appendix F: Font Licenses
Appendix E: Default Setup
Menu or system Option, button, or knob Default setting
Slope
Rising
Mode Auto
Coupling DC
TRIGGER (Edge)
Level 0.00 V
Polarity Normal
Sync
All Lines
TRIGGER ( Video)
Standard NTSC
When
=
Set Pulse
Width
1.00 ms
Polarity Positive
Mode Auto
TRIGGER ( Pulse)
Coupling DC
Coupling DC
BW Lim
it
Off
Verti
cal scale
(volts/division)
Coarse
Prob
e
Volt
age
Voltage Probe
Atte
nuation
10X
Cur
rent Probe Scale
10 A
/V
Invert
Off
Position
0.
00 divs (0.00 V)
Vertic
al system, all
channels
Sc
ale (volts/division)
1.00 V
The Default Setup button does not reset the following settings:
L
anguage option
Saved setups
Saved reference waveforms
Calibration data
Printer setup
GPIB setup
Probe setup (type and attenuation factor)
Date and time
Current folder on the USB flash drive
128 TBS1000 Series Oscilloscopes User Manual