Datasheet

Versatile triggering and acquisition modes

The trigger system is designed for troubleshooting today's mixed signal

designs. Beyond a basic edge trigger

, it also includes pulse width and

runt triggering, which are especially useful for troubleshooting digital

sections of your designs.

Pulse width triggering is perfect for hunting narrow glitches or time out

conditions. Runt trigger is designed to capture signals that are shorter

in amplitude than expected.

The TBS1000C Series Oscilloscope offers several acquisition modes.

The default acquisition mode is Sample Mode which works well for

most applications. The Peak Detect Mode is useful for hunting spikes,

and Average Mode can help to reduce noise on the repetitive signals.

Automated measurements and analysis

A comprehensive set of automated measurements enable fast and

convenient testing of a wide variety of signal conditions for different

applications.

Measurements are displayed on a single screen. They are grouped

into four categories: Frequency, Time, Amplitude, and Area. All

measurements are displayed on a single measurement selection

screen making it easy to choose from 32 automated measurements;

no more hunting through various menus.

Measurements are color coded by the source and are presented on

a transparent background; so waveforms are not obscured by the

readouts.

Measurements are all listed and selected on a single screen

Measurements are transparent so waveforms are not obscured

FFT function

ou can understand the frequency content of your signals with the FFT

function by pressing FFT button in the front-panel .

Display only the FFT or turn on the source waveform display to see

both the frequency and the time domain waveform. A transparent

readout shows important settings without blocking the FFT display.

The time domain source waveform can be displayed above the FFT frequency spectrum

TBS1000C Series Oscilloscope Datasheet