User manual

ManualsBrandsTEKTRONIX ManualsLaboratory Test EquipmentDigital 60 MHz 4-channel 1 null 2.5 null 8 Bit Calibrated to Manufacturer standards Digital storage (D

100

Reference

Single Button.

Push the Single (single sequence) button when you want the

oscilloscope to acquire a single waveform and then stop. Each time you push the

Single button, the oscilloscope begins to acquire another waveform. After the

oscilloscope detects a trigger it completes the acquisition and stops.

Acquisition mode Single button

Sample, Peak Detect Sequence is complete w hen one acquisition is acquired

Average

Sequence is complete when the deﬁned number of

acquisitions is reached; (See page 75, Acquire.)

Scan Mode Display. You can use the Horizontal Scan acquisition mode (also

called Roll mode) to continuously monitor signals that change slowly. The

oscilloscope displays wavefo

rm updates from the left to the right of the screen and

erasesoldpointsasitdisplaysnewpoints. A moving, one-division-wide blank

section of the screen separates the new waveform points from the old.

The oscilloscope changes to the Scan acq

uisition mode when you turn the

Horizontal Scale knob to 100 ms/div or slower, and select the Auto Mode option

in the Trigger Menu.

To disable Scan mode, push the Trig Menu button and

set the Mode option to

Normal.

topping the Acquisition. While the acquisition is running, the waveform display

is live. Stopping the acquisition (when you push the Run/Stop button) freezes

the display. In either mode, the waveform display can be scaled or positioned

with the vertical and horizontal controls.

Autorange

WhenyoupushtheAutoRange button, the oscilloscope a ctivates or deactivates

the Autorange function. An LED light turns on adjacent to the AutoRange button

that indicates when the function is active.

This function automatically adjusts setup values to track a signal. If the s ignal

changes, the setup continues to track the signal. When you power on the

oscilloscope, autoranging is always inactive.

Options Comment

Autoranging

Activates or deactivates the Autorange function; when activated

the adjacent LED light turns on

Vertical and Horizontal Tracks and adjusts both axes

Vertical Only

Tracks and adjusts the Vertical scale;

does not change the

horizontal settings

Horizontal Only

Tracks and adjusts the Horizontal scal

e; does not change the

vertical settings

Undo A utoranging

Causes the oscilloscope to recall the previous setup

TBS1000 Series Oscilloscopes User Manual 77