User manual

USB Flash Drive and Device Ports

5. If a Found New Ha

rdware message appears, follow the on-screen directions

for the Found New Hardware wizard.

Do NOT search for the hardware to install on the web.

6. For a Windows XP systems, follow these steps:

a. If you see the Tektroni

x PictBridge Device dialog box, click Cancel.

b. When prompted, select the option that tells Windows NOT to connect to

Windows Update, and click Next.

c. In the next window, you should see that you are installing software for

a USB Test and Measurement Device. If you do not see USB Test and

Measurement Device software, the OpenChoice Desktop software is not

properly installed.

d. Select the option that installs the software automatically (the recommended

option) and click Next.

Windows will install the driver for your oscilloscope.

e. If you do not see the USB Test and Me asurement Device in step c, or

if Windows cannot ﬁ nd the software driver, the OpenChoice Desktop

software is not properly installed.

In these situations, click Cancel to exit the Found New Hardware wizard.

Do NOT allow the wizard to ﬁnish.

Unplug the USB cable from your oscilloscope and install the OpenChoice

Desktop software.

Reconnect your oscilloscope to the PC and follow steps 6a, 6b, 6c, and 6d.

f. Click Finish.

g. If a dialog labeled Test and Measurement Devic e appears, sele ct what you

would like Windows to do, and click OK.

7. For Windows 2000 systems:

a. When prompted, select the option that tells W

indows to display a list

ofknowndriversandclickNext.

b. In the next window, select USB Te st and Measurement Device. If you do

not see a USB Test and Measurement Device selection, the OpenChoice

Desktop software is not properly installed.

c. In the next window, click Next to allow Windows to install the driver

for your oscilloscope.

Windows will install the driver for your oscilloscope.

d. If you do not see the USB Test and Measurement Device in step b, or if

Windows cannot ﬁnd the software driver, the software is not properly

installed.

TBS1000 Series Oscilloscopes User Manual 71