User manual

Reference
Options Settings Comments
Printer Setup Changes the printer setup (See page 73.)
GPIB Setup ► Address Sets the GPIB address for the TEK-USB-488 adapter (See
page 72.)
Set Date and Time Sets the date and time (See page 101.)
Options
Error Log
Displays a list of any errors logged and the Power Cycle
count
This log is useful if you contact a Tektronix Service Center
for help.
Do Self Cal Performs a self calibration
File Utilities
Displays folder, file, and USB flash drive options (See
page 102.)
Language
English
, French, German, Italian,
Spanish, Japanese, Portuguese,
Simplified Chinese, Traditional
Chines
e, Korean
Selects
the display language of the oscilloscope
Key Po ints
System Status. Selecting System Status from the Utility Menu displays the menus
avail
able for obtaining a list of control settings for each group of oscilloscope
controls.
Push any front-panel menu button to remove the status screen.
Options Comments
Hori
zontal
List
s horizontal parameters
Vertical
Lis
ts vertical parameters of channels
Trigger Lists trigger parameters
Misc
Lists the model of the oscilloscope, the version number of the
so
ftware, and the serial number
Lists values of the communications parameters
Setting the Date and Time. You can use the Set D ate and Time menu to set the
clock date and time. The oscilloscope displays this information, and also uses it to
time stamp files written to a USB flash drive. The oscilloscope contains a built-in
nonreplaceable battery to maintain the clock settings.
The clock does not automatically adjust for seasonal time changes. The calendar
does adjust for Leap years.
Options Comments
↑
↓
Moves the field selection highlight up or down through the list. Use
the multipurpose knob to change the value of the selected field
Set Date and Time Updates the oscilloscope with the specified date and time
Cancel Closes the menu and returns to the previous menu without saving
any changes
TBS1000 Series Oscilloscopes User Manual 101