User manual

Reference
Square Wave or Pulse
When you use the
Autoset function and the oscilloscope determines that the signal
is similar to a square wave or pulse, the oscilloscope displays the following
options:
Square wave o
r
Details
Multi-cycle square
Displays several cycles with appropriate vertical and
horizontal
scaling; the oscilloscope displays Pk-Pk, Mean,
Period, and Frequency automatic measurements
Single-cycle square
Sets the horizontal scale to display about one cycle of the
waveform; the oscilloscope displays Min, Max, Mean, and
Positive W
idth automatic measurements
Rising edge
Displays the edge, and the Rise Time and Peak-to-Peak
automatic
measurements
Falling e
dge
Displays the edge, and the Fall Time and Peak-to-Peak
automatic measurements
Undo Autoset
Causes t
he oscilloscope to recall the previous setup
Video Signal
When yo
u use the Autoset function and the oscilloscope determines that the signal
is a video signal, the oscilloscope displays the following options:
Video signal options Details
Field
s ►All Fields
Displays several fields and the oscilloscope triggers on any
field
Lines ►All L ines
Disp
lays one complete line with parts of the previous and
next line; the oscilloscope triggers o n any line
Line
s ►Number
Displays one complete line with parts of the previous and
next line; use the multipurpose knob to select a specificline
number for the oscilloscope to use as a trigger
Od
d Fields
Displays several fields and the oscilloscope triggers only on
odd numbered fields
Even Fields
Di
splays several fields and the oscilloscope triggers only on
even numbered fields
Undo Autoset
Causes the oscilloscope to recall the previous setup
N
OTE. Video autoset sets the Display Type option to Dot Mode.
TBS1000 Series Oscilloscopes User Manual 81