Datasheet

Horizontal system - Analog channels
Timebase accuracy 20 ppm
Timebase range
TBS1202C, TBS1052C,
TBS1072C, TBS1102C
2 ns/div to 100 sec/div in a 1-2-4 sequence
Horizontal zoom Horizontally expand or compress a live or stopped waveform
Deskew range ± 100 nsec
Trigger system
External trigger input Included on all models
Trigger modes Auto, Normal, Single Sequence
Trigger Types
Edge Positive or negative slope on any channel. Coupling includes DC, HF reject, LF reject, and noise reject.
Pulse Width Trigger on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time.
Runt Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Trigger source CH1, CH2, AUX IN, AC Line
Trigger Coupling DC, Noise Reject, High Frequency Reject, Low Frequency Reject
Trigger signal frequency readout Provides a frequency readout of the trigger source up to instrument bandwidth.
Waveform measurements
Cursors Time, Amplitude, Screen
Automated measurements 32, of which up to six can be displayed on-screen at any one time. Measurements include: Period, Frequency, Rise Time, Fall
Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive
Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive
Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area, Cycle Area, Delay FR, Delay FF, Delay FR,
and Delay RR.
Gating Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, between waveform cursors
or full record length.
Waveform math
Arithmetic Add, Subtract, and Multiply waveforms
FFT Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or
Blackman-Harris.
TBS1000C Series Oscilloscope Datasheet
8 www.tek.com