Datasheet

Maximum input voltage
1 MΩ 300 V
RMS
CAT II with peaks ≤ ±425 V
50 Ω 5 V
RMS
with peaks ≤ ±20 V
DC gain accuracy ±1.5% for 5 mV/div and above, derated at 0.10%/°C above 30 °C
±2.0% for 2 mV/div, derated at 0.10%/°C above 30 °C
±2.5% for 1 mV/div, derated at 0.10%/°C above 30 °C
±3.0% for variable gain, derated 0.10%/°C above 30 °C
Channel-to-channel isolation
(typical)
Any two channels at equal vertical scale ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated bandwidth
Random noise, sample acquisition
mode, 50 Ω termination setting,
full bandwidth, typical
1 mV/div
100 mV/div 1 V/div
1 GHz 114 µV 1.98 mV 17.07 mV
500 MHz 111 µV 1.54 mV 13.47 mV
350 MHz 106 µV 1.7 mV 12.7 mV
200 MHz 111 µV 1.6 mV 15.19 mV
100 MHz 98 µV 1.38 mV 15.87 mV
Offset range
Volts/div setting
Offset range
1 M Ω input 50 Ω input
1 mV/div to 50 mV/div ±1 V ±1 V
50.5 mV/div to 99.5 mV/div ±0.5 V ±0.5 V
100 mV/div to 500 mV/div ±10 V ±10 V
505 mV/div to 995 mV/div ±5 V ±5 V
1 V/div to 10 V/div ±100 V ±5 V
Horizontal system analog channels
Time base range
1 GHz models 400 ps/div to 1000 s/div
≤ 500 MHz models 1 ns/div to 1000 s/div
Maximum duration at highest
sample rate (all/half channels)
1 GHz models 4/2 ms
≤ 500 MHz models 4/4 ms
Time-base delay time range -10 divisions to 5000 s
Channel-to-channel deskew range ±125 ns
Time base accuracy ±10 ppm over any ≥1 ms interval
Datasheet
Vertical system analog channels
16 www.tek.com