User's Manual

Self Tests
Performance Verification
4Ć4
Figure 4Ć1:ăDiagnostics Menu
b.   : Select Execute from the side menu. This
executes all the AWG2005 diagnostics automatically.
c. : The internal diagnostics do an extensive verification of
AWG2005 functions. While this verification progresses, the screen
displays the clock icon. When finished, the resulting status appears
on the screen.
d.      : Verify that no failures are found
and reported onĆscreen. If the diagnostics displays FAIL as the result
of any test, use the instructions in section 6,  to
identify the faulty module. If the diagnostics display an error code,
contact your nearest representative.
2.    : Push a button (other than UTILITY) in the
MENU column to exit the diagnostic menu.