Datasheet

Step 3

Add instrument functionality Instrument functionality can be ordered with the instrument or later as an upgrade kit.

Instrument Option Built-in Functionality

4-RL-1 Extend record length from 31.25 Mpoints/channel to 62.5 Mpoints/channel

4-AFG Add Arbitrary / Function Generator

4-SEC

Add enhanced security for instrument declassification and password protected enabling and

disabling of all USB and Ethernet ports and firmware upgrade.

Step 4

Add optional serial bus triggering,

decode, and search capabilities

Choose the serial support you need today by choosing from these serial analysis options. You can upgrade later by purchasing an

upgrade kit.

Instrument Option

Serial Buses Supported

4-SRAERO Aerospace (MIL-STD-1553, ARINC 429)

4-SRAUDIO Audio (I

S, LJ, RJ, TDM)

4-SRAUTO Automotive (CAN, CAN FD, LIN, FlexRay, and CAN symbolic decoding)

4-SRAUTOSEN Automotive sensor (SENT)

4-SRCOMP Computer (RS-232/422/485/UART)

4-SREMBD Embedded (I

C, SPI)

4-SRENET Ethernet (10BASE-T, 100BASE-TX)

4-SRI3C MIPI I3C (I3C decode and search only)

4-SRPM Power Management (SPMI)

4-SRUSB2 USB (USB2.0 LS, FS, HS)

Differential serial bus? Be sure to check Add analog probes and adapters for differential probes.

Step 5

Add optional analysis capabilities

Instrument Option

Advanced Analysis

4-PWR-BAS

Power Measurements and Analysis

4-SV-BAS Spectrum View frequency domain analysis

4-PS2 Power Solution Bundle (4-PWR-BAS, THDP0200, TCP0030A, 067-1686-xx deskew fixture)

Step 6

Add digital probes Each FlexChannel input can be configured as eight digital channels simply by connecting a TLP058 logic probe to a FlexChannel

input. You can order TLP058 probes with the instrument or separately.

For this instrument

Order To add

MSO44 1 to 4 TLP058 Probes 8 to 32 digital channels

MSO46 1 to 6 TLP058 Probes 8 to 48 digital channels

This option must be purchased at the same time as the instrument. Not available as an upgrade.

This option is not compatible with option 4-PS2

4 Series MSO