Datasheet

Specifications
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Frequency
Frequency range
RSA603A 9 kHz to 3 GHz
RSA607A 9 kHz to 7.5 GHz
Frequency marker readout
accuracy
±(RE × MF + 0.001 × Span) Hz
RE: Reference Frequency Error
MF: Marker Frequency [Hz]
Reference frequency accuracy
Initial accuracy at Cal (30 min
warm-up)
±1 x 10
-6
First year aging, typical ±1 x 10
-6
(1 year)
Cumulative error (Initial
accuracy + temperature +
aging), typical
3 x 10
-6
(1 year)
Temperature drift ±0.9 x 10
-6
(-10 to 60 °C)
External reference input BNC connector, 50 Ω nominal
External reference input
frequency
Every 1 MHz from 1 to 20 MHz plus the following: 1.2288 MHz, 2.048 MHz, 2.4576 MHz, 4.8 MHz, 4.9152 MHz, 9.8304 MHz,
13 MHz, and 19.6608 MHz.
The spurious level on the input signal must be less than -80 dBc within 100 kHz offset to avoid on-screen spurious.
External reference input range ± 5 ppm
External reference input level -10 to +10 dBm
RF input
RF input
RF Input Impedance 50 Ω
RF VSWR (RF Attn = 20 dB),
typical
< 1.2 (10 MHz to 3 GHz)
< 1.5 (>3 GHz to 7.5 GHz)
RF VSWR preamp ON, typical < 1.5 (10 MHz to 6 GHz, RF ATT=10 dB, preamp on)
< 1.7 (> 6 GHz to 7.5 GHz, RF ATT=10 dB, preamp on)
Maximum RF input level
Maximum DC voltage ±40 V (RF input)
Maximum safe input power +33 dBm (RF input, 10 MHz to 7.5 GHz, RF Attn ≥ 20 dB)
+13 dBm (RF input, 9 kHz to 10 MHz)
+20 dBm (RF input, RF Attn < 20 dB)
Datasheet
6 www.tek.com