Datasheet

Input and output ports

Inputs, outputs, and inferfaces

RF input RSA503A/507A: N type, female

RSA513A/518A: N type, female (ships standard with this connector)

RSA513A/518A: Planar Crown, 50 Ω. Users can select this connector instead of the N type in order to select the connector that

best fits their applications. (Users can use adapters compatible with the planar crown that best fits their application.)

External frequency reference

input

BNC, female

Trigger/Sync input BNC, female

Tracking Generator Source

Output

N type, female

GPS Antenna SMA, female

USB Device Port USB 3.0 – Type A

USB Status LED LED, dual color red/green

LED states:

Steady Red: USB power applied, or resetting

Steady Green: Initialized, ready for use

Blinking Green: Transferring data to host

Battery Status LED LED, green

LED states:

Blinking Green: External power connected, charging battery

Off – no external power connected or battery fully charged

Installation requirements

Maximum power dissipation (fully

loaded)

15 W maximum. Maximum line current is 0.2 A at 90 V line.

Surge current 2 A peak maximum, at 25 °C (77 °F) for ≤ 5 line cycles, after the product has been turned off for at least 30 seconds.

Cooling clearance Bottom, top

25.4 mm ( 1.0 in.)

Sides

25.4 mm (1.0 in.)

Rear: 25.4 mm (1.0 in.)

External DC input

Voltage 18 V

Voltage range limits Operation: +12.0 V to +19.95 V

Battery Charging: +17.5 V to +19.95 V

Connector type 2.5mm male

Center conductor: positive

Outer conductor: negative

AC Adapter Output 18 V ± 5%, 5 A (90 W max)

Center conductor: positive

Outer conductor: negative

Spectrum Analyzer