Datasheet

Spurious response
Residual spurious response
(Reference = -30 dBm, RBW =
1 kHz)
<-75 dBm (500 kHz to 60 MHz), typical
< -85 dBm (>60 MHz to 80 MHz), typical
<-100 dBm (>80 MHz to Max CF), typical
(Exceptions: <-90 dBm (13.78 GHz to 13.94 GHz))
Spurious response with Signal
(Image suppression)
< -65 dBc (10 kHz to Max CF, Ref= -20 dBm, Atten = 10 dB, RF input Level = -20 dBm, RBW = 10 Hz)
Spurious response with signal at
CF
Offset ≥ 1 MHz
Frequency Span ≤40 MHz, swept spans >40 MHz
Typical
1 MHz - 100 MHz -- -75 dBc
100 MHz - 3 GHz -72 dBc -75 dBc
3 GHz - 7.5 GHz (RSA507A) -72 dBc -75 dBc
7.5 GHz to 13.6 GHz (RSA513A/RSA518A) -72 dBc -75 dBc
13.6 GHz to 18.0 GHz (RSA518A) -72 dBc -75 dBc
Spurious response with signal at
CF
(150 kHz ≤ offset <1 MHz, Span=2 MHz ):
Frequency
Typical
1 MHz - 100 MHz -70 dBc
100 MHz - 3 GHz -70 dBc
3 GHz - 7.5 GHz (RSA507A) -70 dBc
7.5 GHz - 13.6 GHz (RSA513A/RSA518A) -64 dBc
13.6 GHz - 18.0 GHz (RSA518A) -64 dBc
Spurious response with signal at
other than CF, typical
Frequency
Span ≤40 MHz, swept spans >40 MHz
1 MHz – 25 MHz (LF Band) -73 dBc
25 MHz – 3 GHz -73 dBc
3 GHz – 7.5 GHz (RSA507A) -73 dBc
7.5 GHz - 13.6 GHz (RSA513A/RSA518A) -73 dBc
13.6 GHz - 18.0 GHz (RSA518A) -73 dBc
Spurious response with signal at
half-IF
10
< -75 dBc, (CF: 30 MHz to Max CF, Ref = -20 dBm, Atten = 10 dB, RBW = 10 Hz, Span = 10 kHz)
Signal frequency = 2310 MHz, RF input level = -20 dBm
Local oscillator feed-through to
input connector, typical
< -70 dBm, preamp off.
< -90 dBm, preamp on.
Attenuator = 10 dB.
10
This is an input signal at half of the IF frequency.
Spectrum Analyzer
www.tek.com 15