Datasheet

Sweep speed
Full span sweep speed, typical
mean
8
70 GHz/sec (RBW = 1 MHz)
60 GHz/sec (RBW = 100 kHz)
15.7 GHz/sec (RBW = 10 kHz)
1.7 GHz/sec (RBW = 1 kHz)
Tuning step time via API ≤1 ms
Amplitude and RF
Amplitude and RF flatness
Reference level setting range -170 dBm to +40 dBm, 0.1 dB step, (Standard RF input)
Frequency response at 18 ℃
to 28 ℃ (At 10 dB RF
Attenuator Setting)
Amplitude accuracy at all center frequencies
Center frequency range 18 ⁰C to 28 ⁰C
9 kHz ≤ 3.0 GHz ±0.8 dB
> 3 to 7.5 GHz (RSA507A) ±1.5 dB
>7.5 GHz to 13.6 GHz (RSA513A/RSA518A) ±1.55 dB
>13.6 GHz to 18.0 GHz (RSA518A) ±1.55 dB
Amplitude Accuracy at All
Center Frequencies - Preamp
ON (18 ℃ to 28 ℃ , 10 dB RF
Attenuator)
Center frequency range
18 ⁰C to 28 ⁰C
200 kHz to ≤3.0 GHz ±1.0 dB
> 3 GHz to 7.5 GHz ±1.75 dB
>7.5 GHz to 13.6 GHz ±2.0 dB
>13.6 GHz to 18.0 GHz ±2.0 dB
Preamp gain 27 dB at 2 GHz
21 dB at 6 GHz (RSA507A)
25 dB at 10 GHz (RSA513A)
25 dB at 15 GHz (RSA518A)
Channel response (amplitude and
phase deviation), typical
For these specifications, use a flat top window for maximum CW amplitude verification accuracy with the RF attenuator setting at
10 dB.
Characteristic
Description
Measurement center
frequency
Span Amplitude flatness,
typical
Amplitude flatness,
RMS, typical
Phase linearity, RMS,
typical
9 kHz to 40 MHz ≤40 MHz
9
±1.0 dB 0.60 dB
>40 MHz to 4.0 GHz ≤20 MHz ±0.10 dB 0.08 dB 0.3°
>4 GHz to 7.5 GHz ≤20 MHz ±0.35 dB 0.20 dB 0.7°
>7.5 GHz to 13.6 GHz ≤20 MHz ±0.35 dB 0.20 dB 0.7°
>13.6 GHz to 18.0 GHz ≤20 MHz ±0.35 dB 0.20 dB 0.7°
>40 MHz to 4 GHz ≤40 MHz ±0.35 dB 0.14 dB 0.8°
>4 GHz to 7.5 GHz ≤40 MHz ±0.40 dB 0.20 dB 1.0°
>7.5 GHz to 13.6 GHz ≤40 MHz ±0.60 dB 0.40 dB 1.5°
>13.6 GHz to 18.0 GHz ≤40 MHz ±0.60 dB 0.40 dB 1.5°
8
Measured using a Dell Latitude E5540, i7, Windows
®
7 Pro. Spectrum display is only measurement on screen.
9
Span extents cannot exceed lower frequency limit of the instrument
Spectrum Analyzer
www.tek.com 11