Data Sheet

Playback of recorded signals can reduce hours of watching and waiting for
a spectral violation to minutes at your desk reviewing recorded data.
Recording length is limited only by storage media size and recording is a
basic feature included in SignalVu-PC. SignalVu-PC application SV56
Playback allows for complete analysis by all SignalVu-PC measurements,
including DPX Spectrogram. Minimum signal duration specifications are
maintained during playback. AM/FM audio demodulation can be performed.
Variable span, resolution bandwidth, analysis length, and bandwidth are all
available. Frequency mask testing can be performed on recorded signals
up to 40 MHz in span, with actions on mask violation including beep, stop,
save trace, save picture, and save data. Portions of the playback can be
selected and looped for repeat examination of signals of interest. Playback
can be skip-free, or time gaps can be inserted to reduce review time. A Live
Rate playback ensures fidelity of AM/FM demodulation and provides a
1:1 playback vs. actual time. Clock time of the recording is displayed in the
spectrogram markers for correlation to real world events. In the illustration
below, the FM band is being replayed, with a mask applied to detect
spectral violations, simultaneous with listening to the FM signal at the
center frequency of 92.3 MHz.
DataVu-PC for multi-instrument recording
and analysis of large recordings
DataVu-PC software can control two spectrum analyzers simultaneously
with independent settings. This allows you to monitor a wide span, while
recording at up to 40 MHz bandwidth at any frequency in the range of the
instrument. Once recorded, DataVu-PC can find and mark signals of
interest based on amplitude and frequency-mask characteristics,
eliminating the need for manual inspection of long recordings. Pulse
measurements are available on up to 2,000,000 pulses.
Instrument controller for USB spectrum
analyzers
Tektronix offers the Panasonic FZ-G1 tablet computer as an option to the
RSA306B and as a standalone unit. When purchased from Tektronix, the
FZ-G1 is configured with the specifications shown below. The tablet
configured for Tektronix has many options and capabilities not present in
the base FZ-G1 sold by Panasonic.
When purchased from Tektronix, the FZ-G1 includes pre-loaded SignalVu-
PC software, with custom-programmed display settings and front-panel
buttons to optimize the SignalVu-PC experience.
In addition, Tektronix has tested the FZ-G1 to ensure that the specified real
time performance of all USB spectrum analyzers is met with this
configuration.
Key specifications of the instrument controller
Windows 10 operating system (Win8 Pro COA)
Intel
®
Core 6300U 2.40 GHz Processor (TBD in China)
8GB RAM 256 GB
256 GB Solid State Drive
10.1" (25.6 cm) Daylight-readable screen
10-point Multi Touch+ Digitizer screen plus included pen interface
USB 3.0 + HDMI Ports, 2
nd
USB Port
Wi-Fi, Bluetooth
®
and 4G LTE Multi Carrier Mobile Broadband with
Satellite GPS
MIL-STD-810G certified (4' drop, shock, vibration, rain, dust, sand,
altitude, freeze/thaw, high/low temperature, temperature shock,
humidity, explosive atmosphere)
IP65 certified sealed all-weather design
Integrated microphone
Integrated speaker
On-screen and button volume and mute controls
Integrated battery backup for hot-swap of battery packs
3-year Warranty with Business Class Support (provided by Panasonic
in your region)
Datasheet
6 www.tek.com