Data Sheet

LTE Downlink RF measurements
(SV28xx-SVPC)
Standard Supported 3GPP TS 36.141 Version 12.5
Frame Format supported FDD and TDD
Measurements and Displays
Supported
Adjacent Channel Leakage Ratio (ACLR), Spectrum Emission Mask (SEM), Channel Power, Occupied Bandwidth, Power vs. Time
showing Transmitter OFF power for TDD signals and LTE constellation diagram for Primary Synchronization Signal and
Secondary Synchronization Signal with Cell ID, Group ID, Sector ID, RS (Reference Signal) Power and Frequency Error.
ACLR with E-UTRA bands
(typical, with noise correction)
1st Adjacent Channel 65 dB
2nd Adjacent Channel 66 dB
Mapping (MAPxx-SVPC)
Supported map types Pitney Bowes MapInfo (*.mif), Bitmap (*.bmp), Open Street Maps (.osm)
Saved measurement results Measurement data files (exported results)
Map file used for the
measurements
Google Earth KMZ file
Recallable results files (trace
and setup files)
MapInfo-compatible MIF/MID files
Playback of recorded signals
(SV56)
Playback file type R3F recorded by RSA306, RSA500, or RSA600
Recorded file bandwidth 40 MHz
File playback controls General: Play, stop, exit playback
Location: Begin/end points of playback settable from 0-100%
Skip: Defined skip size from 73 μs up to 99% of file size
Live rate: Plays back at 1:1 rate to recording time
Loop control: Play once, or loop continuously
Memory requirement Recording of signals requires storage with write rates of 300 MB/sec. Playback of recorded files at live rates requires storage with
read rates of 300 MB/sec.
Inputs, outputs, inferfaces, power consumption
RF input Type N, female
External frequency reference input SMA, female
Trigger/sync input SMA, female
Status indicator LED, dual color red/green
USB device port USB 3.0 - Micro-B, can mate with locking thumbscrews
Power consumption Per USB 3.0 SuperSpeed requirements: 5.0 V, ≤ 900 mA (nominal)
Datasheet
SignalVu-PC application licenses
18 www.tek.com