Data Sheet

Audio output
Audio output (from SignalVu-PC or
application programming
interface)
Types AM, FM
IF bandwidth range Five selections, 8 kHz – 200 kHz
Audio output frequency range 50 Hz – 10 kHz
PC audio output 16 bits at 32 ks/s
Audio file output format .wav format, 16 bit, 32 ks/s
SignalVu-PC base performance summary
SignalVu-PC/RSA306B key
characteristics
Maximum span 40 MHz real-time
9 kHz - 6.2 GHz swept
Maximum acquisition time 2.0 s
Minimum IQ resolution 17.9 ns (acquisition BW = 40 MHz)
Tuning Tables Tables that present frequency selection in the form of standards-based channels are available for the following.
Cellular standards families: AMPS, NADC, NMT-450, PDC, GSM, CDMA, CDMA-2000, 1xEV-DO WCDMA, TD-SCDMA, LTE,
WiMax
Unlicensed short range: 802.11a/b/j/g/p/n/ac, Bluetooth
Cordless phone: DECT, PHS
Broadcast: AM, FM, ATSC, DVBT/H, NTSC
Mobile radio, pagers, other: GMRS/FRS, iDEN, FLEX, P25, PWT, SMR, WiMax
Signal Strength display
Signal strength indicator Located at right side of display
Measurement bandwidth Up to 40 MHz, dependent on span and RBW setting
Tone type Variable frequency based on received signal strength
Spectrum and Spurious display
Traces Three traces + 1 math trace + 1 trace from spectrogram for Spectrum display; four traces for Spurious display
Trace functions Normal, Average (VRMS), Max Hold, Min Hold, Average of Logs
Detector Average (VRMS), Average (of logs), CISPR peak, +Peak, Sample for Spectrum only -Peak; when Option SVQP is enabled, CISPR
Quasi Peak and Average
Spectrum trace length 801, 2401, 4001, 8001,10401, 16001, 32001, and 64001 points
RBW range 1.18 Hz to 8 MHz for Spectrum display
DPX spectrum display
Spectrum processing rate
(RBW = auto, trace length 801)
≤10,000 spectrums per second (span independent)
DPX bitmap resolution 201 pixels vertical x 801 pixels horizontal
DPX Spectrogram minimum
time resolution
1
1 ms
≤10,000 per second (span independent)
Marker information Amplitude, frequency, signal density
Datasheet
12 www.tek.com