Data Sheet

Noise and distortion
Displayed Average Noise Level
(DANL)
Reference level = -50 dBm, input terminated with 50 Ω load, log-average detection (10 averages). SignalVu-PC Spectrum
measurements with Span > 40 MHz may use LF or RF path in the first segment of the spectrum sweep.
Center frequency Frequency range DANL (dBm/Hz) DANL (dBm/Hz), typical
< 22 MHz
(LF path)
100 kHz - 42 MHz ≤-130 -133
≥ 22 MHz
(RF path)
2 MHz - <5 MHz ≤-145 ≤-148
5 MHz - <1.0 GHz ≤-161 ≤-163
1.0 GHz - <1.5 GHz ≤-160 ≤-162
1.5 GHz - <2.5 GHz ≤-157 ≤-159
2.5 GHz - <3.5 GHz ≤-154 ≤-156
3.5 GHz - <4.5 GHz ≤-152 ≤-155
4.5 GHz - 6.2 GHz ≤-149 ≤-151
Phase noise Phase noise measured with 1 GHz CW signal at 0 dBm
The following table entries are in dBc/Hz units
Center frequency
Offset 1 GHz 10 MHz (typical) 1 GHz (typical) 2.5 GHz (typical) 6 GHz (typical)
1 kHz ≤-84 ≤-115 ≤-89 ≤-78 ≤-83
10 kHz ≤-84 ≤-122 ≤-87 ≤-84 ≤-85
100 kHz ≤-88 ≤-126 ≤-93 ≤-92 ≤-95
1 MHz ≤-118 ≤-127 ≤-120 ≤-114 ≤-110
Residual spurious response (Reference level ≤ -50 dBm, RF input terminated with 50 Ω load)
CF range 9 kHz - < 1 GHz < -100 dBm
CF range 1 GHz - < 3 GHz < -95 dBm
CF range 3 GHz - 6.2 GHz < -90 dBm
With these exceptions for LO
related spurs
< -80 dBm: 2080-2120 MHz < -80 dBm: 3895-3945 MHz < -85 dBm: 4780-4810 MHz
Residual FM < 10 Hz
P-P
(95% confidence)
3
RD
order IM distortion Two CW signals, 1 MHz separation, each input signal level 5 dB below the reference level setting at the RF input
Reference level at-15 dBm disables Preamp; reference level at -30 dBm enables Preamp
Center frequency 2130 MHz ≤ -63 dBc at reference level -15 dBm, 18 ⁰C to 28 ⁰C
≤ -63 dBc, at reference level -15 dBm, -10 ⁰C to 55 ⁰C, typical
≤ -63 dBc, at reference level -30 dBm, typical
40 MHz to 6.2 GHz, typical < -58 dBc at reference level = -10 dBm
< -50 dBc at reference level = -50 dBm
3
RD
order intercept (TOI)
Center frequency 2130 MHz ≥ +13 dBm at reference level -15 dBm, 18 ⁰C to 28 ⁰C
≥ +13 dBm, at reference level -15 dBm, -10 ⁰C to 55 ⁰C, typical
≥ -2 dBm, at reference level -30 dBm, typical
40 MHz to 6.2 GHz, typical +14 dBm at reference level -10 dBm
-30 dBm at reference level -50 dBm
Datasheet
10 www.tek.com