User manual

General Safety S
ummary
General Safet
y Summary
Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
To Avoid Fire or Personal Injury
Use proper power cord. Use only the power cord specified for this product and certified for the country of use.
Use proper voltage setting. Before applying power, ensure that the line selector is in the proper position for the
source being used.
Ground the product. This product is grounded through the g rounding conductor of the power cord. To avoid electric
shock, the
grounding conductor must be connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings and markings on the product. Consult the
product manual for further ratings information before making connections to the product.
Power disconnect. The power switch disconnects the product from the power source. See instructions for the location.
Do not bl
ock the power switch; it must remain accessible to the user at all times.
Do not op
erate without covers.
Do not operate this product with covers or panels removed.
Do not op
erate with suspected failures.
If you suspect that there is damage to this product, have it inspected by
qualified service personnel.
Avoid exposed circuitry. Do not touch exposed connections and components when power is present.
Use proper fuse. Use only the fuse type and rating specified for this product.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation.
Refer to the manual’s installation instructions for details on installing the product so it has
proper ventilation.
PWS2185, PWS2323, PWS2326, and PWS2721 User Manual iii