User manual

Operating Basic
s
8. Push Enter.
9. Push Esc to exit the menu system.
NOTE. The defa
ult maximum voltage is the full voltage range of the particular power supply being used.
Recall the Power S upply ON/OFF Output S tate at Power On (>OUT RECALL)
This parameter determines the initial On or Off output state after the power supply is powered on. If you select On, the power
supply will restore the state of the output to that which was in use before the power was last turned off. If the output was
turned On when the power supply is turned off or loses power then the output will return to the On state when the power
supply is turned back on or power is restored. Off will disable this function and the output channel will always be set
to Off after the power supply is powered on.
To enable or disable this control,
1. Push the Menu.
2. Use the down arrow key to select OUT RECALL.
3. Push Enter.
4. Use the up arrow key to select On or Off.
5. Push Enter.
6. Push Esc to exit the menu system.
NOTE. The default s election is set to Off.
Recall the Power S upply Operating Parameters at Power On (>SAVE LAST)
This p
arameter determines whether the power supply saves its most recent settings, such as voltage and current, and
restores these settings at power on. If you set this parameter to Off then the power supply returns to the default settings
at power on. If you select On, the power supply will restore the state to that which was in use before the power was
last t
urned off.
To en
able or disable this control,
1. Push
Menu.
2. Use t
he down arrow key to select Save Last.
3. Pus
h Enter.
4. Use
the arrow key s to select On or Off.
5. Pus
h Enter.
6. Pus
h Esc to exit the menu system.
NOTE. The default s election is set to On.
PWS2185, PWS2323, PWS2326, and PWS2721 User Manual 13