User manual

Getting Started
10. Push I-set and use the numeric keys and Enter button to set the current value to the maximum allowable for your current
supply. Check i
f the displayed current value is approximately the same value as the maximum allowable.
11. Turn off the po
wer supply and remove the short wire from the (+) and (-) output terminals.
Cleaning
Inspect the power supply as often as operating conditions require. To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the power supply with a lint-free cloth. Use care to avoid scratching the display.
2. Use a soft cloth dampened with water to clean the pow er supply. Use an aqueous solution of 75% isopropyl alcohol
for more efficient cleaning.
CAUTION. To avoid damage to the surface of the power supply, do not use any abrasive or chemical cleaning agents.
CAUTION. Avoid getting moisture inside the unit during external cleaning. Use only enough cleaning solution to dampen
the cloth or swab.
6 PWS2185, PWS2323, PWS2326, and PWS2721 User Manual