Manual

Advanced Features and Troubleshooting Manual 9

Separation Pages

You can have the printer insert a separation page, or divider page, to separate print jobs,

multiple copies of a single print job, or individual pages of a print job.

There are two selections to make in your printer driver.

1. In a supported driver, locate the Separation Page options:

■ LaserWriter 8.3.4 driver:

In the Print dialog box, click Options.

■ LaserWriter 8.6 driver:

In the Print dialog box, from the pull-down menu (General) select Printer

Specific Options.

■ Windows 95 / Windows 98 PostScript driver:

Start/Settings/Printers, then select Properties for your printer. In the Setup tab,

select Advanced Paper Options.

■ Windows 2000 driver:

From the Layout tab or Paper/Quality tab, click Advanced.

■ Windows NT driver:

From the Properties tab, select the Advanced tab. From the Document Options

tab, select Printer Features.

■ Adobe PS3 driver for Windows 3.1:

Select the Features tab options.

2. Select one of the following for Separation Page:

■ Off: Turns off the Separation Page feature.

■ End of Job: Inserts a separation page between individual print jobs.

■ End of Set: Inserts a separation page between copies, or sets, of a multi-copy

print job.

■ End of Page: Inserts a separation page between every page of a print job.

3. Select one of the following for Separation Page Source:

■ Upper Tray: Takes paper for the separation page from the upper media tray.

■ Middle Tray: Takes paper for the separation page from the middle media tray, if

you have optional paper trays installed.

■ Lower Tray: Takes paper for the separation page from the lower media tray, if

you have optional paper trays installed.