User Manual Color Printer Phaser 600

OCCASIONAL CLEANING
551
1 Using a lint-free cloth that has been
moistened with 90% pure isopropyl
alcohol and inserted into the cleaning tool
(see Cleaning the paper clamp
), place the
“V” opening of the tool over the paper
clamp.
2 Clean the clamp by wiping back and forth
3-4 times with
gentle pressure. Clean a
small section at a time and repeat the
process until the entire clamp is clean.
CAUTION
The paper clamp is more flexible than the back tension blade; when cleaning the
clamp, do not use as much pressure as in the previous procedure, or you might bend
the clamp. Do not twist the tool when cleaning, or you might bend the clamp or catch
the cloth on the clamp’s “cutouts” (
a).
9480-20
2
1
a