User Manual Color Printer Phaser 600
Table Of Contents
- Welcome!
- Contents
- Introduction
- Getting Set Up
- At a glance
- Setting up the printer
- What you get with your printer
- Registering your printer
- Unpacking instructions
- Moving the printer to its operating location
- Removing adhesive tape and cable tie
- Removing the transit restraint
- Removing the shipping blocks
- Attaching the ink loader
- Loading the ink
- Attaching the output bin
- Attaching the Quick Reference Guide
- Connecting the printer
- Selecting a language for the front panel
- Installing the starter paper roll
- Software installation
- PC/Windows software
- Which Windows driver to install?
- Custom Install or Easy Install?
- Setting up the drivers for Windows95 (cont'd.)
- Setting up the drivers for Windows 3.1 (cont'd.)
- Setting up a PostScript driver for Windows NT 3.5 ...
- Setting up the printer on a network for Windows NT...
- Setting up a PostScript driver for Windows NT 4.0 ...
- Setting up the printer on a network for Windows NT...
- Macintosh software
- Workstation software
- Printing Basics
- Printing overview
- Printing from a PC
- Print features quick reference: Windows printer dr...
- Using the Microsoft PostScript driver with Windows...
- Using the AdobePS 4 driver with Windows 95
- Using the Tektronix printer driver for Windows 3.1...
- Using the Adobe PostScript driver for Windows 3.1
- Using the Windows NT 3.5 and 3.51 PostScript drive...
- Using the Windows NT 4.0 PostScript driver
- Printing from a Macintosh
- Printing from a workstation
- Printing from specific applications
- Selecting print features
- All about media
- Image manipulation
- Printer languages: PostScript, HP-GL
- Fonts
- Printing: Beyond the Basics
- Working with color
- Color corrections — making the best selection
- Printing and using the color sampler charts
- Special printing features
- Phaser Copystation
- Laminating your Phaser600 prints
- Printing the Color Sampler Charts
- Color Matching
- Using PANTONE® Color Files
- Using the PhaserPrint™ Plug-in for Photoshop
- Overview
- Compatibility
- Installing the PhaserPrint plug-in for Photoshop
- Using the plug-in
- Starting the PhaserPrint plug-in
- Selecting options in the PhaserPrint dialog box
- Number of copies
- Print using (Macintosh)
- Print using (Windows)
- Printer model
- Media size
- Color correction
- Quality
- Fusing
- Advance media
- Cut media
- Page rotation
- Rendering intent
- Compress image data
- Fast preview
- Manual feed
- Print preview
- Mirror print
- Center page
- No margins
- Image smoothing
- Color control strip
- Stylized representation of the page
- Scaling an image
- Landscape orientation
- Center images
- Replicate images
- Image size
- Image separation
- Number of images
- Image layout
- Media size
- Show color preview of image
- Using the Phaser600 GX Driver
- System requirements
- Installing the Phaser 600 GX printer driver
- Creating a desktop printer
- Setting up unique desktop printers
- Printing with a desktop printer
- Setting up a shared printer
- Printing from QuickDraw GX applications
- Printing from non-QuickDraw GX applications
- Viewing printer status
- Disabling QuickDraw GX
- Printing From DOS
- Printing from UNIX and VMS Workstations
- Using Printer Utilities
- Installing the utility files
- Downloading files to the printer
- Changing the printer's name
- Resetting the printer
- Using the color rendering intents
- Enabling and disabling job pipelining
- Modifying the Advance Media default
- Setting page offset
- Adding Control-D characters to PC files
- Configuring a printer’s serial port
- Other utilities
- Using SCSI Hard Disks
- Using the Printer’s Parallel Port
- Using Different Printer Language Modes
- Caring for Your Printer
- Troubleshooting
- If you need help
- Using the automated fax systems
- Front panel messages
- Symptoms and solutions
- Printing hints
- Improving print speed
- PostScript printing errors
- Printed colors are not what you expected
- Selecting page sizes in Windows applications
- Fonts printing incorrectly from Windows
- Sharing the printer on a network
- Media hints and tips
- Clearing a media jam
- Clearing an ink jam
- Using the Front Panel
- Ordering Information
- Regulatory Information
- Index
SETTING DEFAULT HP-GL PEN COLORS
530
Setting default HP-GL pen colors
Use the
HPGLPENS.PS
file to change the color and width of the default pen colors.
The HP 7475A plotter actually has only six pens, but the printer's emulation
supports up to 256 pens.
HP-GL pen settings cannot be made persistent across printer power cycles; pen
settings revert to the default when the printer is turned off. To restore your pen
settings, you must download your edited
HPGLPENS.PS
file to the printer whenever
the printer has been turned off or reset.
The pen color change is persistent across jobs but not across printer power cycles;
it affects all HP-GL jobs that immediately follow it until the next printer reset.
NOTE
The
HPGLPENS.PS
file affects printer operation. If the printer is shared on a network,
using this file may affect the prints requested from other users.