Printer User Manual

3 Printing Basics
3-10 Phaser 380 Color Printer
Using the Adobe PostScript driver for Windows 3.1
To select printing options, follow these steps:
1. From the Control Panel, double-click Printers.
2. In the Printers dialog box, select the Tektronix Phaser 380 printer,
then click Setup. A dialog box appears with the printerÕs name
across the top.
3. Click the following tabs to see printing options; refer to your
Windows documentation for more information on tabs and
options.
■ Click the Paper tab to see media options, such as media sizes,
media trays, and media types.
■ Click the Features tab to see printer-speciÞc options, such as color
corrections.
■ Set the Timeout settings.
Not Selected: Type a value in this text box to change the
number of seconds Windows waits before notifying you that a
printer is off-line. The default is 15 seconds, and is
recommended.
Transmission Retry: On large or multiple-page documents
you may see an Alert message that the printer is no longer
accepting data before the job is completely sent to the printer.
To avoid these unnecessary timeouts, set this option to a larger
value, such as 900 seconds (15 minutes). Type a value
between 45 and 999 in this text box; the Windows default
setting is 45 seconds.
■ Click the PostScript tab to see PostScript-related options.
■ In the Performance Options Þeld, select the Use PostScript Level 2
Features option.