User Manual

Remote operation
Select results (cont.)
VAF – Fundamental VA
VARF – Fundamental VAr
PFF – Fundamental Power Factor
VRNG – Voltage range
ARNG – C urrent range
VLL – Line-to-line voltage
VLN – Line-to-neutral voltage
VHM – Volts harmonics
AHM – Amps harmonics
WHM – Watts harmonics
Description
:SEL determines which results are displayed on the screen, also the results
returned by the :FRD? command. To see the currently selected command, use
the :FRF? command.
:SEL:ALL selects all results. Adding the secondary command of :GRP allow only
those results within the s pecified group to be selected.
:SEL:CLR clears all the results selected for all groups. Adding the secondary
command of :GRP allows only those results within the specified group to be
cleared.
To add results to a group the :INST:NSEL <group> command must be used first.
If it is not, then the last selected g roup will be affected (or group 1 if no group
has previously been selected).
1
These results are only available for displaying / returning when the group is in integrator mode.
72 PA3000 Power Analyzer User Manual