User Manual

The menu system
and
The weighting factors (k
n
)are:
Table 3: Weighing factors for TIF
Harm k
n
Harm k
n
Harm k
n
1 0.5 21 6050 41 10340
3 30 23 6370 43 10600
5
225 24 6650 47 10210
6 400 25 6680 49 9820
7
650 27 6970 50 9670
9 1320 29 7320 53 8740
11 2260 30 7570
55
8090
12 2760 31 7820 59 6730
13 3360 33 8830 61 6130
15 4350 35 8830 65 4400
17 5100 36 9080 67 3700
18 5400 37 9330 71 2750
19 5630 39 9840 73 2190
Minimum and Maximum
Hold Columns
The M inimum and Maxim
um Hold Columns provide a means for adding a new
column along side the current selected results to display either the minimum or
maximum values of the selected measurements. The columns can independently
be enabled or disabled. To reset the values shown in the columns, press the
RESET/CLEAR key. Each time either the minimum or maximum hold column is
enabled, the values for both columns are reset.
Sum Results Column
The Sum Results Column provides a m eans to add a sum column along side
the current group of measurements. The results are displayed for multi-channel
groups. The column will appear after the last channel in the group. The maximum
column will appe
ar to the right of the sum results; the minimum column will
appear to the left of the sum results as appropriate.
Sum results are
available in all wiring configurations except 1 phase, 2 wire
(1P2W). (See page 47, Wiring.)
PA3000 Power Analyzer User Manual 41