User Manual

The menu system
The menu system
This section describes some of the key menus of the PA3000.
Measurement
s
Use the Measurements menu to set the order in which the measurements appear
on the screen; default measurements are: V
rms
,A
rms
, Watt, VA, PF, and Freq. This
is on a per-g
roup basis. The measurements, on a group-by-group basis, can be
displayed in any order, including harmonics. However, harmonic results will
always be displayed as a block (all the voltage harmonics will be displayed as a
continuous block based on the parameters set).
The following figure shows a normal Measurements screen.
Figure 22: Measurements screen
On the measurements screen you can select a measur ement to display as a result
and change the order o f the displayed results. The following soft keys available
with the Measurements screen:
Go to previous menu
Selection Up or top of list
Move Measurement
36 PA3000 Power Analyzer User Manual