User Manual

Front panel
Figure 14
: Setup screen (second screen)
Front panel USB p ort
Use the front panel USB port with an attached USB flash drive to capture screens
or to collect data for use on another device.
When you connect the flash drive to the USB port, the LED under the DATA
OUT key momentarily turns on.
When you press the SCREEN SAVE key, the instrument performs a screen
capture and saves the screen to the flash drive. The LED under the DATA OUT
key turns on while the screen is saved to the flash drive .
When you press the DATA O UT key, the instrument logs the measurement data to
a file on the flash drive; the LED under the key blinks while the instrument logs
the data. Press the key again to stop the data logging.
For additional information on the front panel USB port refer to the discussion
under Communication ports, later in this document. (See page 146, Front panel
USB host port.)
22 PA3000 Power Analyzer User Manual