User Manual

Front panel
Quick view key
s
The Quick view keys provide easy access to different display screens.
Figure 6: Quick view keys
The fi rst seven keys change the display screen to show different information:
(RESULT key) displays the normal Results screen.
(WAVE key) displa ys waveforms.
(BAR key) displays a harmonics bar chart.
(INTEG key) displays integrator waveforms when in Integrator mode.
(VECTOR key) displays a vector diagram.
(MATH key) displays the math results as configured from the math
menu.
(SETUP key) displays a screen showing the current instrument
configuration.
Press any one of these keys to change to the appropriate display. Pressing the
same key again has no effect.
At the bottom there is a ZOOM key (
), and left and right arrow hard keys.
The ZOOM key changes the number of results displayed on the screen. It will go
from four columns, to two columns, to one column, and then to four columns with
math results at the bottom. Pressing again will return the display to four columns.
12 PA3000 Power Analyzer User Manual