User Manual

Getting started
Figure 2:
Rear panel input module
Connect
the AC supply live to the VHI terminal.
Connect the AC supply neutral to the VLO terminal.
Connect the load neutral to either the 30 A AHI or 1 A A1A terminal.
Connect the supply neutral to the ALO terminal.
For plug-connected single phase products, the simplest and safest way to make a
connection to the product under test is to use a Tektronix Break Out Box. This
providesalinesocketforconnectionoftheproductand4x4mmsocketsfor
direct connection to the PA3000 terminals as described above.
Turn on the supply to the load and the power analyzer is now ready to take
measurements. Note that it is not necessary to power off or power on the
ins
trument on when connecting the load.
PA3000 Power Analyzer User Manual 5