User Manual
Getting started
Before you begin - safety
Carefully read and adhere to the following warning statements before you connect
the power analyzer.
WARNING. To avoid possible electric shock or personal injury please be aware
of the following items:
By connecting the power analyzer to active circuits, the terminals and certain
parts inside the power analyzer are live.
If possible, open the circuit before establishing a connection to the power analyzer.
Before connecting the circuits, e nsure that the maximum measuring voltage and
maximum voltage to earth ground (600 V
rms
, CAT II) is not exceeded.
Do not use leads and accessories that do not comply with relevant safety
standards, as this could lead to serious injury or death from electric shock.
Shunts and conductors can generate heat when in use and surfaces can burn
the skin.
Qualified p ersonnel
This product is intended to be operated by qualified personnel only. This means
only persons who are familiar with the installation, assembly, connection,
inspection of c onnections, and operation of the power analyzer and who have been
trained in the following areas:
Switching on/off, enabling, earth-grounding and identification of electrical
circuits and services/systems according to the applicable safety standards
Maintenance and operation of a ppropriate safety gear, in accordance with the
applicable safety standards
First aid
Ensure that all persons using the device have read and fully understood the u ser
manual and safety instructions.
Installation
Mains connection must conform to these ranges/values: 100 – 240 V,
50/60 Hz.
The device can only be used under certain ambient conditions. Ensure that the
actual ambient conditions conform to the admissible conditions specified in
this manual.
Ensure this product is installed in such a way that its power cable is accessible
at all times and can easily be disconnected.
PA3000 Power Analyzer User Manual 1