User Manual

PA3000 software
Create and log f
ormulas for the calculation of power conversion efficiency
and other values
Export measur
ement data to .csv or .xls format for import into other
applications
Automate in
strument setup, data collection, and report generation for key
applications with just a few clicks, using wizard-driven interfaces
Perform aut
omated full compliance testing for Low Power Standby per
IEC 62301 Ed. 2.0
Perform au
tomated pre-compliance testing for current harmonics per
IEC 61000-3-2:2014 Ed. 4 and IEC 610004-7-:2002 + A1:2009. (Only
currently available with a PA1000 Power Analyzer)
Set user-defined limits
Several
application examples using the power analyzer and the PWRVIEW
software are provided in this document. (See page 103, Application examples.)
Use these examples to become more familiar using the power analyzer by itself
or with PWRVIEW software. A PDF version of the PWRVIEW online help is
available for download at www.tek.com.
Firmw
areupdateutility
The PA3000 has been designed to add new features by updating the firmware
within the product. The firmware is updated by using a free PC software program.
Thi
s program can be found under the PA3000 section of the Tektronix Web site
(www.tek.com). Download the software and install it on your PC.
On
ce installed, run the software to get the main screen:
PA3000 Power Analyzer User Manual 101