User Manual

Remote operation
Screen save co
mmands
:DISP:DATA?
Display data
Syntax
:DISP:DATA?
Description
The command freezes the display and returns a bitmap image of the
screen. Once the transfer is complete the display will update normally.
The binary data is the contents of a .bmp file and can be written directly to
a file on a host computer.
Returns This command returns a bitmap image as an IEEE 488.2 <DEFINITE
LENGTH ARBITRARY BLOCK RESPONSE DATA> formatted response.
Math commands
The math commands enable setting up the math screen on the power analyzer, as
well as th
e returning the results.
:MATH:FUNC
Math function information
Syntax
:MATH:FUNC <funcNumber>,<name> ,<formula>, <unit>
Where <funcNumber> = 1 through 30
<name>
– user vis ible name
<formula> – formula for math function
<unit> – units to be displayed
Returns
1 if successful, otherwise 0.
Description
This command configures the specified math function.
Syntax
:MATH:FUNC? <funcNu mber>
Where <funcNumber> is a valid math function number between 1 and 30
Returns
<name>,<formula >,<unit>
Whe
re
<name> – user visible name
<formula> – formula for math function
<un
it> – units to be displayed
Description
Th
is command will return the math func tion name, formula, and units for
the function.
:MATH:FUNC:EN
Math function enable
Syntax
:MATH:FUNC:EN <funcN umber>,<ena ble>
Where <funcNumber> is a valid math function number between 1 and 30
<enable> is 1 to enable the display of the function and 0 to disable it.
Description
This command will enable or disable math function in the M ath screen.
PA3000 Power Analyzer User Manual 91