User Manual

Remote operation
Static Ethernet configuration (cont.)
Syntax
:COM:ETH:STAT?
Returns 0 or 1
Syntax
:COM:ETH:STAT:SUB <i p value>
:COM:ETH:
STAT:IP <ip value>
:COM:ETH:STAT:GATE < ip value>
SUB – Subnet mask
IP – P addr
ess
GATE – D efault gateway
Where <ip value> is in the format xxx.xxx .xxx .xxx
Description
These commands set the assigned static IP values for the power analyzer.
Syntax
:COM:ETH:STAT:SUB?
:COM:ETH:STAT:IP?
:COM:E
TH:STAT:GATE?
SUB – Subnet mask
IP – IP address
GATE –
Default gateway
Returns
The IP
address in the format xxx.xxx.xxx.xxx.
:COM:ETH:MAC
Ethernet MAC Address
Synt
ax
:COM:ETH:MAC?
Returns
MAC
address in the format of 12 hexadecimal characters
Description
Thi
s command returns the MAC address on the Ethernet controller. The
MAC address would be of the form: 0x0019B9635D08.
Datalog commands
The datalog commands produce the same functionality as the Datalog menu and
as the DATA OUT key on the front panel.
:DATA:USB
U
SB Data logging
Syntax
:DATA:USB <stop/sta rt>
Where <stop/start> 0 = stop; 1 = start
Description
This command has the same function as pressing the DATA OUT key. If a
USB flash drive is present, it will log data to the flash drive.
90 PA3000 Power Analyzer User Manual