Datasheet

ManualsBrandsTektronix ManualsTV Converter BoxP6703B

Optical-to-Electrical Converters

P6701B & P6703B Datasheet

Small, conveniently packaged P6701B and P6703B optical-to-electrical

analog converters provide an accurate interface for optical pulse shape

measurements.

Features and benefits

Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm

High-bandwidth DC up to 1.2 GHz

High Gain 1 V/mW

Low Noise <11 pW/√Hz

Probe Connects to DPO7000

and DPO/MSO70000

Series

SONET/SDH and Fibre Channel Reference Receiver Performance:

TDS500C/700C (Opt. 3C or 4C)

P6701B – Fibre Channel up to 1063 Mb/s

P6703B – SONET/SDH up to 622 Mb/s

Applications

Eye Pattern Testing of Optical Communication Signals (SONET/SDH

and Fibre Channel)

Product description

The Tektronix P6700 Series optical-to-electrical (O/E) converters change

optical signals into electrical signals for convenient analysis on Tektronix

DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate

adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped

with a TekProbe interface, or when used with the 1103 TekProbe power

supply. The P6700 Series O/E converters are ideal for optical source

characterization in the development, manufacture, or service of optical

communication systems and devices.

Small, conveniently packaged P6701B and P6703B optical-to-electrical

analog converters provide an accurate interface for optical pulse shape

measurements. The high gain, large dynamic range, and stable output

offset of these O/E converters make them ideal for performing eye pattern

analysis and extinction measurements.

The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with

an FC/PC connector. Using the standard assortment of hybrid fiber-optic

mating sleeves, these O/Es can accommodate the various industry

connector standards.

The TekProbe interface provides power, auto-scaling, auto-termination, and

correct units (microwatts) when used with Tektronix DPO7000 or DPO/

MSO70000 and earlier TekProbe-equipped Series oscilloscopes.

Performance you can count on

Depend on Tektronix to provide you with performance you can count on. In

addition to industry-leading service and support, this product comes backed

by a one-year warranty as standard.

The standard P6701B has a nominal frequency response which follows the

fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The

1103 TekProbe power supply can be used to connect these products to the

DSA8300 Series sampling oscilloscopes.

Requires the TPA-to-BNC adapter

Requires the TCA-to-BNC adapter

www.tek.com 1

Summary of content (4 pages)

PAGE 1
Optical-to-Electrical Converters P6701B & P6703B Datasheet Product description The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply.
PAGE 2
Datasheet P6703B: Typical Wavelength-dependent Gain (at 25 °C) OC-3/STM-1 SONET/SDH Transmitter Eye Pattern Test P6701B: Typical Wavelength-dependent Gain (at 25 °C) 2 www.tek.
PAGE 3
Optical-to-Electrical-Converters - P6701B P6703B Specifications All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise. Probe overview Characteristic P6701B P6703B Wavelength response 500 to 950 nm 1100 to 1650 nm Bandwidth (Typical) DC to 1.0 GHz DC to 1.
PAGE 4
Datasheet Options Service options Opt. C3 Calibration Service 3 Years Opt. C5 Calibration Service 5 Years Opt. D1 Calibration Data Report Opt. D3 Calibration Data Report 3 Years (with Opt. C3) Opt. D5 Calibration Data Report 5 Years (with Opt. C5) Opt. R3 Repair Service 3 Years (including warranty) Opt. R5 Repair Service 5 Years (including warranty) Power supply 1103 TekProbe Power Supply. Please specify power plug when ordering.