User Manual

Specifications
Specification
s
The specifications in the following Tables apply to a P6250 or P6251 differential probe installed on a Tektronix TDS5000B
oscilloscope. When the probe is used with another oscilloscope, the oscilloscope must have an input impedance of 50 Ω
and a bandwidth of 1 GHz. The probe must have a warm-up per iod of at least 20 minutes and be in an environment that
does not exceed the limits described. (See Table 1.) The probe calibration should be run on the host instrument before
verifying the warranted probe specifications. Specifications for the P6250 and P6251 differential probes fall into three
categories: warranted, typical, and nominal characteristics.
P6250 & P6251 Technical Reference 1