User Manual

General Safety S
ummary
General Safet
y Summary
Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of a larger system. Read the safety sections of the other
component manuals for warnings and cautions related to operating the system.
To Avoid Fire or Personal Injury
Connect and Disconnect Properly. Do not connect or disconnect probes or test leads while they are connected
to a voltage s
ource.
Ground the Pro
duct.
This product is indirectly grounded through the grounding conductor of the mainframe power cord.
To avoid electric shock, the grounding conductor must be connected to earth ground. Before making connections to the input
or output terminals of the product, ensure that the product is properly grounded.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings and markings on the product. Consult
the product m
anual for further ratings information before m aking connections to the product.
Connect the p
robe reference lead to earth ground only.
Do not apply a
potential to any terminal, including the common termi nal, that exceeds the maximum rating of that terminal.
Do Not Operat
e Without Covers.
Do not operate this product with covers or panels removed.
Do Not Operat
e With Suspected Failures.
If you suspect that there is damage to this product, have it inspected by
qualified service personnel.
Avoid Exposed Circuitry. Do not touch exposed connections and components when power is present.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
P6250 & P6251 Technical Reference iii