User Manual

Performance Ver
ification
Attenuator
100 X, 50 W, BNC c
onnector
Aeroflex 60B50W
-40dB
Spring-loaded
probe tip pins
P7260 probe accessory Tektronix 016-1917-xx
Special Adapters
Some of the adapters used in these procedures are available only from Tektronix. These adapters are described on
the following pages.
1103 Power Supply
The 1103 powe
r supply is used to power the probe under test. BNC connectors on the front of the power supply provides
access to the probe output signal for performance verification measurements.
1. BNC connector for probe output measurements
2. BNC input connections
P6250 & P6251 Technical Reference 17